00114562258 Thermoid Air Power Jackhammer Hose - 50ft - 200 PSI - 3/4" ID
Thermoid Air Power Jackhammer Hose is a hose as tough as its name. A rugged 4 -spiral construction available in 200, 250 or 300 psi, Air Power can tackle the job that only a jackhammer can dish out. The EPDM tube and cover handles heat, ozone and weather cracking better than other compounds. The OEM factory assemblies have domestic or foreign manufactured crimped steel fittings. Durability is built-in and this hose is ready for hard work.
|Application:||Thermoid Air Power Jackhammer Hose is a rugged 4-spiral hose.||SAE Rating:||N/A|
|Reinforcement:||Spiral polyester yarn||Cover:||EPDM|
|Temperature Range:||-40 Deg. F to +200 Deg. F (-40 Deg. C to +93 Deg. C)||Crimp Fittings:||N/A|
|Limited Oil Resistance|
|Part Number||Nominal Inner Diameter||Nominal Outside Diameter||Reinforcement
Bulk / By the Foot : We sell hose in Bulk Lengths unless you agree to purchase at a by the foot price as listed above in an options selector. This means we make every effort to provide exact single lengths, however with manufacturer guidelines on bulk hose, your order may come in multiple lengths and may be plus or minus 10% of your bulk order. If you require ONE length in a specific length you must specify by the drop down selector that you will be paying a premium for a single length. There are no exceptions to the bulk guidelines and all prices listed on our website are in bulk price. By ordering through our website you agree that you have read, fully understand and agree to these terms and conditions.
|Series||Air Power Jackhammer|
|Minimum Bend Radius||4.50"|
|Reinforcement||Spiral Polyester Yarn|
|Temperature Range||-40 Deg. F to 200 Deg. F, -40 Deg. C to 93 Deg. C|
|Working Pressure||200 PSI|