63PT-0440 Dixon Valve Brass Compression Fitting - Brass Insert - 1/4" Tube Size x .040 Wall Thickness

  • $0.28
Advantages:
  • Delrin® sleeves and brass inserts convert standard compression fittings for use with industrial grades of thermoplastic tubing.
  • No flaring, soldering or other preparation of tubing necessary to assemble.
  • Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.
Specifications:
  • Underwriter's Laboratories listed for flammable liquid. Compression fittings meet functional requirements of SAE J-512 and ASA.
Assembly Instructions:
  • Slide nut, then sleeve onto tubing. The thread end of the nut must face out.
  • Insert the tube into the fitting. Be sure the tube is bottomed on the fitting shoulder.
  • Assemble nut to body, and tighten hand-tight. Then follow the number of wrench turns as indicated in the table to the right.
Fitting Size Tube Size Turns Required to Seal from Hand-Tight
60C Series with Soft Metal Tubing 60PT Series with Thermoplastic Tubing
2 1/8" 1-1/4" -
3 3/16" 1-1/4" -
4 1/4" 1-1/4" 2
5 5/16" 1-1/4" 2
6 3/8" 2-1/4" 2
8 1/2" 2-1/4" 2
10 5/8" 2-1/4" 2
12 3/4" 2-1/4" 2
14 7/8 2-1/4" -
Part Number Tube Size Wall Thickness Material Weight (Lbs)
63PT-0216 1/8" .016 Brass 0.0010
63PT-0223 1/8" .023 Brass 0.0002
63PT-0232 1/8" .032 Brass 0.0002
63PT-0325 3/16" .025 Brass 0.0006
63PT-0340 3/16" .040 Brass 0.0005
63PT-0440 1/4" .040 Brass 0.0010
63PT-0462 1/4" .062 Brass 0.0025
63PT-0540 5/16" .040 Brass 0.0015
63PT-0562 5/16" .062 Brass 0.0021
63PT-0662 3/8" .062 Brass 0.0100
63PT-0862 1/2" .062 Brass 0.0050
63PT-1062 5/8" .062 Brass 0.0050