1. Home
  2. 2FS2-S Dixon Valve 303 stainless F-Series Quick Disconnect 1/4" Manual Industrial Interchange Pneumatic Coupler - Standard Hose Barb - 1/4" Hose ID

2FS2-S Dixon Valve 303 stainless F-Series Quick Disconnect 1/4" Manual Industrial Interchange Pneumatic Coupler - Standard Hose Barb - 1/4" Hose ID

  • $21.32
Zoom image

2FS2-S Dixon Valve 303 stainless F-Series Quick Disconnect 1/4" Manual Industrial Interchange Pneumatic Coupler - Standard Hose Barb - 1/4" Hose ID

  • $21.32

Dixon Quick Disconnect Couplings - DF-Series Pneumatic Couplings - F-Series Manual Industrial Interchange Coupler (Standard Hose Barb)

Specifications:
  • Rated pressure for connected 303 Stainless Steel Coupler & 303 Stainless Steel Plug: 500 PSI (35 bar) Maximum Working and 11,500 PSI (795 bar) Burst
  • Temperature Range: -40 deg. F to +250 deg. F (-40 deg. C to +121 deg. C)
Construction:
  • Machined components are manufactured using solid bar stock.
  • Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
  • Nitrile (Buna-N) seals are standard.
  • Steel componentry is plated using ROHS Compliant Trivalent Chrome.
  • Steel tubular valve.
Compatibility & Interchange Data:
  • Foster 3, 4, 5 and 6 Series
  • Parker 20-Series Manual Interchange
  • Hansen 1000, 400 and 500
How It Works:
  • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
  • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
  • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
  • After the line is fully exhausted, you are able to safely separate the nipple from the coupler.
Safety Notes:
  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
  • Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
  • WARNING: Brass products contain a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.
  • Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
Part Number Size Hose ID Material Length Max. OD Hex Weight (Lbs.)
2FS2 1/4" 1/4" steel 2.53" 0.88" 3/4" 0.1800
2FS2-B 1/4" 1/4" brass 2.53" 0.88" 3/4" 0.1800
2FS2-S 1/4" 1/4" 303 stainless 2.53" 0.88" 3/4" 0.1800
2FS2.5-B 1/4" 5/16" brass 2.53" 0.88" 3/4" 0.1800
2FS3-B 1/4" 3/8" brass 2.53" 0.88" 3/4" 0.1800
2FS3-S 1/4" 3/8" 303 stainless 2.53" 0.88" 3/4" 0.1900
3FS2 3/8" 1/4" steel 2.86" 1.06" 7/8" 0.2700
3FS3 3/8" 3/8" steel 2.86" 1.06" 7/8" 0.2700
3FS3-S 3/8" 3/8" 303 stainless 2.86" 1.06" 7/8" 0.2800
3FS4 3/8" 1/2" steel 2.86" 1.06" 7/8" 0.2800
4FS3 1/2" 3/8" steel 3.49" 1.19" 1" 0.4100
4FS4 1/2" 1/2" steel 3.49" 1.19" 1" 0.4300
4FS4-S 1/2" 1/2" 303 stainless 3.49" 1.19" 1" 0.4300
4FS6 1/2" 3/4" steel 3.49" 1.19" 1" 0.4800