2FM2-S Dixon Valve 303 Stainless Steel F-Series Quick Disconnect 1/4" Manual Industrial Interchange Pneumatic Coupler - 1/4"-18 Male NPTF

  • $17.32
Specifications:
  • Rated pressure for connected 303 Stainless Steel Coupler & 303 Stainless Steel Plug: 500 PSI (35 bar) Maximum Working and 11,500 PSI (795 bar) Burst
  • Temperature Range: -40 deg. F to +250 deg. F (-40 deg. C to +121 deg. C)
Construction:
  • Machined components are manufactured using solid bar stock.
  • Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life.
  • Nitrile (Buna-N) seals are standard
  • Steel componentry is plated using ROHS Compliant Trivalent Chrome.
  • Steel tubular valve.
Compatibility & Interchange Data:
  • Foster 3, 4, 5 and 6 Series
  • Parker 20 - Series Manual Interchange
  • Hansen 1000, 400 and 500
How It Works:
  • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
  • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
  • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
  • After the line is fully exhausted, you are able to safely separate the nipple from the coupler.
Safety Notes:
  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
  • WARNING: Brass products contain a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.
Part Number Size Male Threads Material Length Max. OD Hex Weight (Lbs.)
2FM1-B 1/4" 1/8" - 27 NPTF brass 1.97" 0.88" 3/4" 0.1800
2FM1-S 1/4" 1/8" - 27 NPTF 303 stainless 1.97" 0.88" 3/4" 0.1800
2FBM1-B 1/4" 1/8" - 28 BSPT brass 1.97" 0.88" 3/4" 0.1800
2FM2 1/4" 1/4" - 18 NPTF steel 2.04" 0.88" 3/4" 0.1800
2FM2-B 1/4" 1/4" - 18 NPTF brass 2.04" 0.88" 3/4" 0.1900
2FM2-S 1/4" 1/4" - 18 NPTF 303 stainless 2.04" 0.88" 3/4" 0.1800
2FBM2-B 1/4" 1/4" - 19 BSPT brass 2.04" 0.88" 3/4" 0.1900
2FM3-B 1/4" 3/8" - 18 NPTF brass 2.08" 0.88" 3/4" 0.1900
2FM3-S 1/4" 3/8" - 18 NPTF 303 stainless 2.08" 0.88" 3/4" 0.1900
2FBM3-B 1/4" 3/8" - 19 BSPT brass 2.08" 0.88" 3/4" 0.1900
3FM2 3/8" 1/4" - 18 NPTF steel 2.45" 1.06" 7/8" 0.2600
3FM3 3/8" 3/8" - 18 NPTF steel 2.46" 1.06" 7/8" 0.2700
3FM3-S 3/8" 3/8" - 18 NPTF 303 stainless 2.46" 1.06" 7/8" 0.2800
3FBM3 3/8" 3/8" - 19 BSPT steel 2.46" 1.06" 7/8" 0.2700
3FM4 3/8" 1/2" - 14 NPTF steel 2.55" 1.06" 7/8" 0.2900
4FM3 1/2" 3/8" - 18 NPTF steel 2.97" 1.19" 1" 0.4200
4FM4 1/2" 1/2" - 14 NPTF steel 3.07" 1.19" 1" 0.4500
4FM4-S 1/2" 1/2" - 14 NPTF 303 stainless 3.07" 1.19" 1" 0.4700
4FBM4 1/2" 1/2" - 14 BSPT steel 3.07" 1.19" 1" 0.4500
4FM6 1/2" 3/4" - 14 NPTF steel 3.12" 1.19" 1-1/16" 0.5000