D2M1-B Dixon Valve Brass DF-Series Quick Disconnect 1/4" Industrial Interchange Pneumatic Nipple - 1/8"-27 Male NPTF

  • $1.37
Specifications:
  • Rated pressure when connected with Brass D-Series Automatic Couplers: 500 PSI (35 bar) Maximum Working and 16,000 PSI (1,100 bar) Burst
  • Rated pressure when connected with Brass F-Series Manual Couplers: 300 PSI (20 bar) Maximum Working and 8,500 PSI (586 bar) Burst
  • Temperature Range: -40 deg. F to +250 deg. F (-40 deg. C to +121 deg. C)
Construction:
  • Machined components are manufactured using solid bar stock.
  • Steel componentry is plated using ROHS Compliant Trivalent Chrome.
Compatibility & Interchange Data:
  • Foster 3, 4, 5 and 6 Series
  • Parker 30 - Series Automatic Interchange & Parker 20-Series Manual Interchange
  • Hansen 3000, 4000, 5000 and 6000 & Hansen 1000, 400 and 500
How It Works:
  • To disconnect, begin by holding the hose on the nipple side with three of your fingers, leaving your thumb and index finger free.
  • Grab the sleeve with your thumb and index finger and begin to pull the sleeve towards the palm of your hand.
  • After pulling the sleeve, the nipple will move out of the coupler slightly. Continue to hold the hose and coupler sleeve until all air is fully exhausted.
  • After the line is fully exhausted, you are able to safely separate the nipple from the coupler.
Safety Notes:
  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
  • WARNING: Brass products contain a chemical known to the State of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.
Part Number Size Male Threads Material Length Max. OD Hex Weight (Lbs.)
D2M1 1/4" 1/8" - 27 NPTF steel 1.57" 0.58" 1/2" 0.0500
D2M1-B 1/4" 1/8" - 27 NPTF brass 1.57" 0.58" 1/2" 0.0500
D2M1-S 1/4" 1/8" - 27 NPTF 303 stainless 1.57" 0.58" 1/2" 0.0500
D2M2 1/4" 1/4" - 18 NPTF steel 1.69" 0.65" 9/16" 0.0500
D2M2-B 1/4" 1/4" - 18 NPTF brass 1.69" 0.65" 9/16" 0.0500
D2M2-S 1/4" 1/4" - 18 NPTF 303 stainless 1.69" 0.65" 9/16" 0.0600
D2BM2 1/4" 1/4" - 19 BSPT steel 1.69" 0.65" 9/16" 0.0500
D2M3 1/4" 3/8" - 18 NPTF steel 1.75" 0.79" 11/16" 0.0500
D2M3-B 1/4" 3/8" - 18 NPTF brass 1.75" 0.79" 11/16" 0.0700
D2M3-S 1/4" 3/8" - 18 NPTF 303 stainless 1.75" 0.79" 11/16" 0.0800
D2BM3 1/4" 3/8" - 19 BSPT steel 1.75" 0.79" 11/16" 0.0700
D3M2 3/8" 1/4" - 18 NPTF steel 1.81" 0.79" 11/16" 0.0800
D3M3 3/8" 3/8" - 18 NPTF steel 1.87" 0.79" 11/16" 0.0900
D3M3-B 3/8" 3/8" - 18 NPTF brass 1.87" 0.79" 11/16" 0.0900
D3M3-S 3/8" 3/8" - 18 NPTF 303 stainless 1.87" 0.79" 11/16" 0.0900
D3BM3 3/8" 3/8" - 19 BSPT steel 1.87" 0.79" 11/16" 0.0900
D3M4 3/8" 1/2" - 14 NPTF steel 2.03" 1.01" 7/8" 0.1500
D4M2 1/2" 1/4" - 18 NPTF steel 2.13" 0.79" 11/16" 0.1400
D4M3 1/2" 3/8" - 18 NPTF steel 2.19" 0.79" 11/16" 0.1600
D4M4 1/2" 1/2" - 14 NPTF steel 2.34" 1.01" 7/8" 0.1600
D4M4-B 1/2" 1/2" - 14 NPTF brass 2.34" 1.01" 7/8" 0.1800
D4M4-S 1/2" 1/2" - 14 NPTF 303 stainless 2.34" 1.01" 7/8" 0.1600
D4BM4 1/2" 1/2" - 14 BSPT steel 2.34" 1.01" 7/8" 0.1600
D4M6 1/2" 3/4" - 14 NPTF steel 2.50" 1.23" 1-1/16" 0.2400
D4M6-B 1/2" 3/4" - 14 NPTF brass 2.50" 1.23" 1-1/16" 0.2400
D6M4 3/4" 1/2" - 14 NPTF steel 2.38" 1.52" 1-5/16" 0.2200
D6M6 3/4" 3/4" - 14 NPTF steel 2.38" 1.52" 1-5/16" 0.2500
D6M8 3/4" 1" - 11-1/2 NPTF steel 2.56" 1.80" 1-9/16" 0.2600