My shopping cart
Your cart is currently empty.
Continue ShoppingEN-4TW / FC807-04 Eaton Aeroquip Everflex PTFE Hose FC807-4 (Old Part #: S-4TW)
Overview: | |||
---|---|---|---|
|
SPECIFICATIONS
Application: |
Steam, Compressor Discharge, Chemical Transfer |
SAE Rating: |
SAE 100R14A |
---|---|---|---|
Tube: |
Non-conductive Teflon |
Reinforcement: |
One or two layers of stainless steel wire braid |
Cover: |
One or two layers of stainless steel wire braid |
Temperature Range: |
-73°C to + 260°C (-100°F to +500°F) |
Crimp Fittings: |
Reusable Fittings: |
Part Number |
Hose I.D. |
Hose O.D. |
Working Pressure |
Min. Burst Pressure |
Min. Bend Radius |
Hose Weight |
Vacuum Service |
Crimp Sockets |
||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
mm |
in |
mm |
in |
bar |
PSI |
bar |
PSI |
mm |
in |
Kg/m |
lbs/ft |
In/hg |
|
304 Stainless Steel Braid |
||||||||||||||
EN-4TW |
4.8 |
0.19 |
8.2 |
0.32 |
207 bar |
3000 PSI |
827 bar |
12000 PSI |
50.8 |
2 |
0.09 |
0.06 |
28 |
|
EN-5TW |
6.4 |
0.25 |
10.1 |
0.4 |
207 bar |
3000 PSI |
827 bar |
12000 PSI |
76.2 |
3 |
0.12 |
0.08 |
28 |
|
EN-6TW |
7.9 |
0.31 |
11.6 |
0.46 |
172 bar |
2500 PSI |
689 bar |
10000 PSI |
101.6 |
4 |
0.15 |
0.1 |
28‡ |
|
EN-8TW |
10.4 |
0.41 |
14.3 |
0.56 |
138 bar |
2000 PSI |
552 bar |
8000 PSI |
127 |
5 |
0.18 |
0.12 |
28‡ |
|
EN-10TW |
12.7 |
0.5 |
16.8 |
0.66 |
121 bar |
1750 PSI |
483 bar |
7000 PSI |
165.1 |
6.5 |
0.25 |
0.17 |
28‡ |
|
EN-12TW |
15.7 |
0.62 |
20.1 |
0.79 |
103 bar |
1500 PSI |
414 bar |
6000 PSI |
190.5 |
7.5 |
0.28 |
0.19 |
28‡ |
|
EN-16TW |
22.4 |
0.88 |
26.9 |
1.06 |
69 bar |
1000 PSI |
276 bar |
4000 PSI |
228.6 |
9 |
0.4 |
0.27 |
12‡ |
|
316 Stainless Steel Braid |
||||||||||||||
4.8 |
0.19 |
8.2 |
0.32 |
207 bar |
3000 PSI |
827 bar |
12000 PSI |
50.8 |
2 |
0.09 |
0.06 |
28 |
||
22.4 |
0.88 |
26.9 |
1.06 |
62 bar |
900 PSI |
248 bar |
3600 PSI |
228.6 |
9 |
0.4 |
0.27 |
12‡ |
Teflon® is a registered trademark of DuPont used under license by Eaton. WARNING: These hoses can be used to convey hazardous chemicals, steam, hot liquids or other dangerous materials which can cause death, serious bodily injury including burns, pressure wounds or chemical exposure if released accidentally. They should, therefore, only be handled or worked on by personnel properly trained in the safe handling of the materials or chemicals conveyed in the hoses. ‡ Maximum negative pressure for -16 and larger are suitable for hose which has suffered no external damage or kinking. If greater negative pressures are required for -16 and larger hoses, the use of an internal support coil is recommended. Use of an internal support coil in -06 and larger hose is recommended for tube support where extended or continuous service at high temperature together with low or negative pressure is expected. Every attempt has been taken to provide accurate detailed usable information online, however please consult Eaton and Eaton Aeroquip handbooks for the most accurate and up to date data and specifics. All liability of Eaton products warrantied and guaranteed by manufacturer. Eaton hose and fittings are engineered to match Eaton Aeroquip hose and fitting tolerances. The use of Eaton fittings on hose supplied by other manufacturers may result in the production of unreliable and unsafe hose assemblies and is neither recommended or authorized by Eaton Corporation, HoseKit.com, or any other entity. Consult current master catalog for additional warnings and cautions.