12-DME-12 Dixon Valve Instrumentation Fitting - Stainless Steel Male Elbow - 3/4" Tube OD x 3/4" Male NPT

  • $49.21
Features:
  • Fully interchangeable with Swagelok® and Parker A-Lok® fittings.
  • Double collet (ferrule) swaging action.
  • Two positive seal points.
  • ASTM material construction.
  • Material: 316 stainless steel.
  • Temperature Ratings: -325 deg. F to 1200 deg. F (-198 deg. C to 648 deg. C)
Installation Instructions:
  • Cut tubing squarely and clean tube end thoroughly to remove burrs.
  • Insert the tubing into the assembly making sure the tubing seats firm against the shoulder of the body and the nut is finger tight.
  • Tighten the nut with a wrench 1-1/4 turns, while holding the body with a second wrench.
Safety Guidelines:
  • Never connect, disconnect or remake a fitting with pressure in the system.
  • Make sure all fittings are properly installed.
  • It is not recommended to go beyond the pressure rating of the tubing. Elongation could occur in the tubing, shrinking the wall thickness and cause potential harm.
  • For proper sealing it is recommended that the tubing and fittings be of like material.
  • Always use proper thread lubricant and sealants on tapered pipe threads.
  • Never bleed a system by loosening a fitting.

Suggested Working Pressures

Wall Thickness .028 .035 .049 .065 .083 .095 .109
1/4" 4,000 5,100 7,500 10,100 --- --- ---
3/8" --- 3,300 4,700 6,600 --- --- ---
1/2" --- 2,600 3,700 5,000 6,600 --- ---
5/8" --- --- 2,900 3,900 5,200 6,000 ---
3/4" --- --- 2,400 3,200 4,200 4,900 5,700
Part Number Tube OD Male NPT Interchanges Min/Max Temp Package Quantity Weight (Lbs)
4-DME-2 1/4" 1/8"-27 400-2-2 325 deg. F / 1200 deg. F (-198.33 deg. C / 648.89 deg. C) 10 0.8000
4-DME-4 1/4" 1/4"-18 400-2-4 325 deg. F / 1200 deg. F (-198.33 deg. C / 648.89 deg. C) 10 1.2000
6-DME-4 3/8" 1/4"-18 600-2-4 325 deg. F / 1200 deg. F (-198.33 deg. C / 648.89 deg. C) 10 1.2000
6-DME-6 3/8" 3/8"-18 600-2-6 325 deg. F / 1200 deg. F (-198.33 deg. C / 648.89 deg. C) 10 1.6000
8-DME-8 1/2" 1/2"-14 810-2-8 325 deg. F / 1200 deg. F (-198.33 deg. C / 648.89 deg. C) 10 2.8000
12-DME-8 3/4" 1/2"-14 1210-2-8 325 deg. F / 1200 deg. F (-198.33 deg. C / 648.89 deg. C) 10 -
12-DME-12 3/4" 3/4" 1210-2-12 325 deg. F / 1200 deg. F (-198.33 deg. C / 648.89 deg. C) 10 -
16-DME-12 1" 3/4"" 1610-2-12 325 deg. F / 1200 deg. F (-198.33 deg. C / 648.89 deg. C) 10 -
16-DME-16 1" 1" 1610-2-16 325 deg. F / 1200 deg. F (-198.33 deg. C / 648.89 deg. C) 10 -