Skip to content
Login for the best B2B Wholesale Experience.
Login for the best B2B Wholesale Experience.
150PI3V Banjo 1-1/2" Cast Iron Pump 3HP Briggs & Stratton® Engine - FKM Seals

150PI3V by Banjo | 1-1/2" Cast Iron Pump 3HP Briggs & Stratton® Engine | Seals | FKM

Save $648.82 Save $648.82
$1,622.05
$1,622.05 - $1,622.05
$1,622.05
$973.23
$973.23 - $973.23
$973.23

Banjo Self-Priming Centrifugal Pumps - 1-1/2" Cast Iron Pumps with Gas Engines, C-Flange Pumps, & Replacement Parts
Specifications for Variant SKU: 150PI3V Banjo

SPECIFICATIONS

Application: Fluids, Agriculture, Industrial
Product Manual: 1-1/2 & 2" Cast Iron & Stainless Steel Pump Instruction Manual PDF Video: N/A
Features:
  • Cast iron construction for rugged dependable service
  • Stainless steel shaft sleeve to protect engine shaft
  • Carbon ceramic seal with stainless steel cup and spring with FKM (viton type) rubber
  • Replaceable inlet and outlet flanges
  • Dynamically balanced impeller
  • Pump Only packs complete and ready for attachment to gasoline engine
  • Pedestal pump for long coupling to electric motor
Notes:
  • Important: Recommended horsepower, listed below, is for water only. Heavier fluids may require additional horsepower or a trimmed impeller
  • CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump
  • Engine warranty service available at authorized Briggs & Stratton® and Honda® dealers.
  • DO NOT USE WITH FLAMMABLE LIQUIDS
Part Number Description Horsepower
1-1/2" Cast Iron Pumps with Gas Engines
150PI3V 1-1/2" Cast Iron Pump 3HP Briggs & Stratton® Engine - FKM Seals 3 HP N/A
150PI-3 1-1/2" Cast Iron Pump with 3.5 HP Briggs & Stratton® Engine 3.5 HP (Made to Order)
1-1/2" Cast Iron C-Flange Pumps
150POICF5/8-4.1 1-1/2" Cast Iron C-Flange Pump with 5.8" Shaft Sleeve* & 4.1 Impeller N/A (Made to Order)

* Recommendation for 5/8" Shaft: 56C Frame Size, 3 HP, 3450 RPM, & 5" Max Impeller for close coupling to electric motors. 7/8" Shaft: 145TC Frame Size, 3 HP, 3450 RPM, & 5" Max Impeller for close coupling to electric motors.

Replacement Parts for 1-1/2" Cast Iron Pumps
Item Part Number Description Quantity Required
1 17001 1-1/2" Threaded Outlet Flange 1
2 17003 1-1/2" Threaded Inlet Flange 1
3 17004 Adapter for Gas Engine 1
3 17046 C-Flange Adapter 1
4 17005 5/8" Sleeve Drive for Electric Motor 1
4 17006* 3/4" Sleeve Drive 1
4 17007 7/8" Sleeve Drive for Electric Motor 1
5 17008* 5" Impeller 1
5 17008-4.1* 4.1" Trimmed Impeller 1
6 17010 1/2" Hex Nut 1
7 17011* Wear Plate 1
8 17013 EPDM Gasket 1
9 17016 Check Valve Assembly 1
10 17018* Gasket Adapter 1
11 15022 1-1/2"-2" Handle 1
12 17023 5/8" Clamp for 3/4" Shaft Assembly (Old Style) 1
12 17123 5/8" Clamp for 3/4" Shaft Assembly (Keyed) 1
12 17024 7/8" Clamp for 3/4" Shaft Assembly 1
13 17026 2" Pump Housing 1
14 V10118 5/16" Lock Washer 18
15 V10119 5/16" - 18 SS Hex Nut 6
Not Shown 12882R Housing 1
Not Shown 12883R Bearing Pedestal with 3/4" Shaft Only 1
Not Shown 12883B Bearings 2
16 12882A Complete Pedestal Assembly 1
17 17040 5/16"-24 x 1.00" Cap Screw 4
18 17028* 2" EPDM Seal Assembly 1
18 17035* FKM (viton type) Seal Assembly 1
18 17035SD* 2" Severe Duty Seal 1
19 17042 1-1/4" X 5/16"-18-2A5A Stud 6
20 17019 5/16"-18 x 3/4" Cap Screw 8
21 17009B 5/8"-18 Impeller Nut 1
22 17130 5/16-18 x 1.00" FHSCS, 18-8 SS 2
23 12777 1/2" Plug 1
24 UV15163 1-1/2" O-Ring 1
Not Shown 17033 Z Rails (Pair) 1
Not Shown 17100 1-1/2" & 2" Repair Kit (Consists of items 4*, 5*, 7,10,18*) 1
Banjo

Banjo

Banjo is a world-class producer of a wide range of mechanical and electrical valves, fittings, and self-priming centrifugal pumps for agriculture and numerous industrial applications that ship to every corner of the globe. Banjo employs an array of molding presses, numerous machining and assembly cells, and an optimized logistics system empowering our production and shipping operations.

Shop Parts by Banjo