|
Quality: |
- 24h 100% seal test guaranteed
- Dual sealing system allows valve to be operated in either direction making installation easier
- No metal-to-metal moving parts
- No maintenance ever required
- Handle clearly shows ball position
- Silicone-free lubricant on all seals
- Handle stops on body to avoid stresses at stem
- Chrome plated brass ball for longer life with rinse hole
|
|
Body: |
- Hot forged sand blasted, nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
- Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications
|
|
Stem: |
- Blowout-proof nickel plated brass stem
- Two FPM O-rings at the stem for maximum safety
|
|
Sealing: |
- Pure PTFE self-lubricating seats with flexible-lip design
|
|
Threads: |
- ISO 7/1, BS 21 BSPT taper female by female threads
|
|
Flow: |
- Full port to DIN 3357 for maximum flow
|
|
Handle: |
- Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
- Handle removable with valve in service
- WARNING: do not exceed reasonable temperature and/or electrical load
|
|
Working Pressure & Temperature: |
- 40 Bar (600 PSI) up to 2", 30 Bar (450 PSI) over 2" non-shock cold working pressure
- -40°C (-40°F)/ +170°C (+350°F)
- For use with dangerous fluids temperature rating is -20°C +60°C and pressure rating is 5 Bar
- AS4617 Limitation for GAS: 2100 Kpa up to 2" and 1500 Kpa from 2-1/2" to 4" rated working pressure and 0°C/ +60°C temperature
- WARNING: freezing of the fluid in the installation may severely damage the valve
|
|
Upon request: |
- AISI 316 stainless steel ball
- Glass filled PTFE seals
- Custom design
|
|
PED Directive: |
- Assessment according to Pressure Equipment Directive 2014/68/UE module B+D by Pascal (1115)
|
|
Approved by or in Compliance with: |
- The Australian Gas Association (Australia)
- Factory Mutual (United States)
- GOST-R (Russia)
- Hygiene and epidemic center in Moscow city (Russia)
- BSI Group (United Kingdom)
- RoHS Compliant (EU)
- NOTE: approvals apply to specific configurations/sizes only.
|
|
| Part Number |
Size |
Dimensions (Inches) |
D
(inch) |
DN
(mm) |
I
(mm) |
L
(mm) |
G
(mm) |
CH
(mm) |
| S84B56 |
1/4" |
1/4" |
8mm |
12mm |
45mm" |
22.5mm |
20mm |
| S84C56 |
3/8" |
3/8" |
10mm |
12m |
45mm |
22.5mm |
20mm |
| S84D56 |
1/2" |
1/2" |
15mm" |
15.5mm" |
59mm" |
29.5mm |
25mm |
| S84E56 |
3/4" |
3/4" |
20mm |
17mm |
64mm |
32mm |
31mm |
| S84F56 |
1" |
1" |
25mm |
21mm |
81mm |
40.5mm |
40mm |
| S84G56** |
1-1/4" |
1-1/4" |
32mm |
23mm |
93mm |
46.5mm |
49mm |
| S84H56** |
1-1/2" |
1-1/2" |
40mm |
23mm |
102mm |
51mm |
54mm |
| S84I56** |
2" |
2" |
50mm |
26.5mm |
121mm |
60.5mm |
68.5mm |
**Steel T-handle
*DN shows the nominal flow diameter. Actual flow diameter complies with full port DIN 3357 part 4.
Stem configuration of valves over 2" is slightly different. Ball valves are marked CE on handle from 1-1/4" to 2", on body over 2" as follows:
CE 1115 cat IIIB+D PS: 5 GAS TS1: -20°C TS2: +60°C
