Skip to content
Login for the best B2B Wholesale Experience.
Login for the best B2B Wholesale Experience.
10345 (10-345) Midland SAE 45° Flare Fitting - Forged Male Run Tee - 1/4" Male SAE 45° Flare x 1/4" Male NPTF - Brass

10345 by Midland | SAE 45° Flare Fitting | Forged Run | 1/4" Male SAE 45° Flare x 1/4" Male NPTF | Tee | Brass

Save $3.13 Save $3.13
$7.83
$7.83 - $7.83
$7.83
$4.70
$4.70 - $4.70
$4.70

Midland Industries
Brass Fitting - SAE 45° Flare - Forged Male Run Tee - Brass

Inventory @ Manufacturers Warehouse: 371 Units
Specifications for Variant SKU: 10345 Midland
Shape (Orientation): Tee
Ends Configuration: 1/4in Male SAE 45 Flare, 1/4in Male NPTF, 1/4in Male SAE 45 Flare, Some Ends Match
Material(s): Brass
Applicable Specs & Approvals: Applicable ASA Standards, Applicable ASME Standards, Applicable SAE Standards, Applicable Military Standards
Applications: LP and Natural Gas, Flammable Liquids, Instrumentation, Refrigeration, Power Steering, Hydraulic and Pneumatic Systems. Used With: Copper, Brass, Aluminum and Steel hydraulic tubing that can be flared.
SAE Rating: N/A Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military standards).
Vibration: Good resistance - use long nut when greater vibration resistance is required. Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures
Tolerance: +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Lead Free: Not Lead Free
Working Pressure Ranges:
  • Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 730F with copper tubing:
Assembly Instructions:
  • 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square.
  • 2) Slide nut on tube. Threaded end "A" of nut must face out.
  • 3) Flare end of tube with a 450 flaring tool.
    • A) Measure flare diameter
    • B) Examine flare for excessive thin out.
  • 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.
  • 5) Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn.
  • Note: Do not over-torque as it may damage the fitting or split the tubing at the flare.
Tube OD 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"
Thread Size B 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 11/16-16 3/4-16 7/8-14 1-1/16-14
Crossover Series:
51F 501 T3 151F 51
Part Number Male Flare
(1 & 3)		 Male NPTF
(2)		 A B C Body Size Approx. Weight
(Lbs.)
10361
(10-361)		 3/16" x 5/16" 1/8" 0.87" 0.78" 0.97" 0.44" 0.08
10343
(10-343)		 3/16" 1/8" 0.75" 0.75" 0.75" 0.37" 0.05
10344
(10-344) 		1/4" 1/8" 0.78" 0.75" 0.78" 0.37" 0.06
10344B* 1/4" 1/8" 0.90" 0.76" 0.86" 0.37" 0.07
10345
(10-345) 		1/4" 1/4" 0.88" 0.88" 0.88" 0.44" 0.08
10347
(10-347) 		5/16" 1/8" 0.88" 0.80" 0.88" 0.44" 0.08
10348
(10-348) 		5/16" 1/4" 0.94" 0.94" 0.94" 0.44" 0.08
10350
(10-350) 		3/8" 1/4" 1.00" 0.94" 1.00" 0.44" 0.12
10351
(10-351) 		3/8" 3/8" 1.00" 1.00" 1.00" 0.47" 0.10
10340
(10-340) 		3/8" 1/2" 1.09" 1.09" 1.16" 0.59" 0.18
10352
(10-352) 		3/8" 1/2" 1.12" 1.22" 1.12" 0.69" 0.12
10353
(10-353) 		1/2" x 3/8" 1/2" 1.22" 1.22" 1.15" 0.69" 0.22
10354
(10-354) 		1/2" 3/8" 1.16" 1.09" 1.16" 0.59" 0.18
10355
(10-355) 		1/2" 1/2" 1.22" 1.22" 1.22" 0.69" 0.22
10357
(10-357) 		5/8" 1/2" 1.41" 1.31" 1.41" 0.69" 0.28
10359
(10-359) 		3/4" 1/2" 1.63" 1.59" 1.63" 0.88" 0.48
10360
(10-360) 		3/4" 3/4" 1.62" 1.44" 1.62" 0.88" 0.48

* Barstock

Dimension data can change without notice

<->
Midland Industries

Midland Industries

Midland Industries is a family of brands recognizable industry wide. Midland is a supplier of brass fittings, valves, and accessories for hose, pipe and tube in brass, bronze, stainless steel, steel, malleable iron, and plastics.

Shop Parts by Midland Industries