Skip to content
Login for the best B2B Wholesale Experience.
Login for the best B2B Wholesale Experience.
200PIHY Banjo 2" Cast Iron Pump with 12 HP Hydraulic Motor

200PIHY by Banjo | Centrifugal Pumps | 2" Cast Iron Pump with 12 HP Hydraulic Motor

Save $177.40 Save $177.40
$1,596.60
$1,596.60 - $1,596.60
$1,596.60
$1,419.20
$1,419.20 - $1,419.20
$1,419.20

Banjo Self-Priming Centrifugal Pumps - 2" Cast Iron Pumps with Hydraulic Motors & Replacement Parts
Specifications for Variant SKU: 200PIHY Banjo

SPECIFICATIONS

Application: Fluids, Agriculture, Industrial
Hydraulic Motor Data:
U.S. Gallons/Rev. 0.0025 Cubic Inches/Rev. 0.580
Liters/Rev. 0.0097 Max Hydraulic Pressure 2000 PSI
Min Hydraulic Pressure 200 PSI Inlet Port SAE 10 (7/8-14 UNF-2B)
Outlet Port SAE 10 (7/8-14 UNF-2B) Minimum GPM Required 6 GPM 2400 RPM
Maximum GPM Required 10 GPM 4000 RPM Ideal GPM Required 9 GPM 3600 RPM
Connection Information
Inlet "A" Port Outlet "B" Port
Supplied check valve is to ensure proper rotation of the Banjo pump. Place check valve in outlet port (marked "B") for proper right hand rotation.
Spool Valve Information
Required Outlet Flow Min 8 GPM / Max 13 GPM Required System Pressure Min 600 PSI / Max 3000 PSI
Pump Features:
  • Rugged construction for dependable service
  • Carbon ceramic seal with stainless steel cup and spring with FKM (viton type) rubber
  • Replaceable inlet and outlet flanges
  • Dynamically balanced impeller
Hydraulic Motor Features:
  • Hydraulic fluid capacity: Minimum 6 Gallons / Maximum 10 Gallons
  • 12 H.P. Motor
  • Open or closed system
  • Minimum 500 PSI / Maximum 2000 PSI
Notes:
  • CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump.
  • DO NOT USE WITH FLAMMABLE LIQUIDS.
  • Recommendation: Banjo recommends using the motor spool control valve or a suitable equivalent. The lack of such a valve in this circuit may cause failure to the hydraulic motor.
Part Number Description Horsepower
2" Cast Iron Pumps with Hydraulic Motors
200PIHY 2" Cast Iron Pump w/12 HP Hydraulic Motor 12 HP (Made to Order)
Hydraulic Motor Spool Valve
HSV1000 Hydraulic Motor Spool Valve N/A ---
Replacement Parts for 2" Cast Iron Pumps
Item Part Number Description Package Quantity
1 17026 Pump Housing 1
2 17042 Pump Housing Stud 1
3 17011 Wear Plate 1
4 17130 5/16-18 x 1.00" FHSCS, 18-8 SS 1
5 17008 5" Impeller 1
6 17007 7/8" Sleeve Drive for Hydraulic Motor 1
7 17009B 5/8" Impeller Nut 1
9 17055A Hydraulic Adapter Shaft 1
10 17056 SKF 6206-2RS1 Bearing 1
11 17024 7/8" Clamp, no key 1
12 HY1013 MGG@0025BC1D3 Hydraulic Motor Assembly 1
13 V20018 3/8" Lock Washer 1
14 18010SS 3/8"-16 x 1.25" HHHCS 1
15 17018 Gasket Adapter 1
16 17028 EPDM Seal Assembly 1
16 17035 FKM (viton type) Seal Assembly 1
16 17035SD Severe Duty Seal Assembly 1
17 17000 2" Outlet Flange 1
17 17001 1-1/2" Outlet Flange 1
18 17002 2" Inlet Flange 1
18 17003 1-1/2" Inlet Flange 1
19 17013 EPDM Gasket 1
20 17016 Gasket Check Valve Assembly 1
21 17019 5/16"-18 x 0.75" Cap Screw 1
22 V10118 5/16" Split Lock Washer 1
23 12777 1/2" Plug 1
24 V10119 5/16"-18 Hex Nut 1
25 15022 Handle 1
26 17010 1/2" Hex Nut - 13UNF-RH 1
27 UV15163 O-Ring 1
Replacement Parts for 2" Hydraulic Adapter
Item Part Number Description Package Quantity
1 17049A Hydraulic Motor Adapter 1
2 17018 Gasket Adapter 1
3 17035 Seal Assembly 1
Not Shown 17007 7/8" SS Shaft Sleeve 1
4 17056 SKF 6206-2RS1 Bearing 1
5 17055A Hydraulic Adapter Shaft 1
6 HY1013 Gresen® Hydraulic Motor 1
7 V20018 Lock Washer 1
8 18010SS Bolt 1
Not Shown HY1003 Seal Kit 1
Banjo

Banjo

Banjo is a world-class producer of a wide range of mechanical and electrical valves, fittings, and self-priming centrifugal pumps for agriculture and numerous industrial applications that ship to every corner of the globe. Banjo employs an array of molding presses, numerous machining and assembly cells, and an optimized logistics system empowering our production and shipping operations.

Shop Parts by Banjo