9SS8HPMP38XFP38-NI-90V (23263-NI-90V) Super Swivel 90° High Pressure 3/8-18 Male Pipe NPTF x 3/8-18 Female NPTF - 0.312" Through Hole - Electroless Nickel - Viton Seal

  • $122.82
  • 90° Swivels rotating joints provide free rotation on one axis with a right-angle change of path.
  • They reduce the complexity of hose lines providing for minimal friction and allowing free movement of hoses and piping.
  • 90° Super Swivels allow for sharp corners with reduced risk of kinks and flow restriction and free rotation.
  • Super Swivels ball bearing race design withstands heavy side loads preventing premature seal wear and leaks.
  • Super Swivels connect directly to hose lines without adapters reducing overall costs of hydraulics.
  • No Kinks - No Hose Twisting.
  • Super Swivels are not recommended for breathing air/oxygen or steam.
  • All swivels have 4 to 1 proof pressure, except 10,000 PSI = 3 to 1 proof pressure.
  • Any series stem will fit with the same series body.
Base Material and Plating:
  • Super Swivels are manufactured from Carbon Steel or 304 and 440C Stainless Steel
  • Carbon Steel Zinc (Z) Plating is recommended for non-corrosive applications, i.e. hydraulic, pneumatic, etc.
  • Carbon Steel Nickel (NI) Plating is recommended for mildly corrosive environments, i.e. water, mild chemicals, solvents, etc.
  • 304 Stainless Steel (304) is recommended for low pressure corrosive environments.
  • 440C Stainless Steel (440) is a martensitic, high carbon, magnetic stainless steel, heat-treated to maintain a high-pressure rating. Not as corrosion resistant as 300 Series Stainless Steel.
Seal Material:
  • (V) Viton® (Fluorocarbon) - For most petroleum based applications. (-15 deg. F to 250 deg. F)
  • (AL) Aflas® (Tetrafluoroethylene-propylene copolymer) - Better resistance to many individual chemicals. For service in high temperature environments. (Low temperature limitations.) (+32 deg. F to 400 deg. F)
  • (PFA) PFA Teflon® - High resistance to many individual chemicals where Teflon seals are required. (1,500 max psi) (-15 deg. F to 400 deg. F)
Part Number Material Seal Overall
Wrench Port T1 Stem T2 SWG.
9SS8HPMP38XFP38-NI-90V Electroless Nickel Viton 3.375" 2.800" 1.520" 1.000" 3/8-18 NPTF 3/8-18 NPTF 0.660" 10,000 PSIG 0.312"
9SS8HPMP50XFP50-Ni-90V Electroless Nickel Viton 3.855" 3.145" 1.842" 1.000" 1/2-14 NPTF 1/2-14 NPTF 1.048" 10,000 PSIG 0.437"
9SS8HPMP50XFP50-Ni-AL-POLY Electroless Nickel AFLAS