1. Home
  2. 9SS8MJ10XMJ10-Z-AL (7021-Z-AL) Super Swivel 90° 7/8-14 Male 37 deg. JIC x 7/8-14 Male 37 deg. JIC - 0.297" Through Hole - Zinc - AFLAS Seal

9SS8MJ10XMJ10-Z-AL (7021-Z-AL) Super Swivel 90° 7/8-14 Male 37 deg. JIC x 7/8-14 Male 37 deg. JIC - 0.297" Through Hole - Zinc - AFLAS Seal

  • $39.86
Zoom image

9SS8MJ10XMJ10-Z-AL (7021-Z-AL) Super Swivel 90° 7/8-14 Male 37 deg. JIC x 7/8-14 Male 37 deg. JIC - 0.297" Through Hole - Zinc - AFLAS Seal

  • $39.86

Super Swivels - 90° Swivels - Male 37 deg. JIC X Male 37 deg. JIC

Trustpilot
Features:
  • 90° Swivels rotating joints provide free rotation on one axis with a right-angle change of path.
  • They reduce the complexity of hose lines providing for minimal friction and allowing free movement of hoses and piping.
  • 90° Super Swivels allow for sharp corners with reduced risk of kinks and flow restriction and free rotation.
  • Super Swivels ball bearing race design withstands heavy side loads preventing premature seal wear and leaks.
  • Super Swivels connect directly to hose lines without adapters reducing overall costs of hydraulics.
  • No Kinks - No Hose Twisting.
Notes:
  • Super Swivels are not recommended for breathing air/oxygen or steam.
  • All swivels have 4 to 1 proof pressure, except 10,000 PSI = 3 to 1 proof pressure.
  • Any series stem will fit with the same series body.
Base Material and Plating:
  • Super Swivels are manufactured from Carbon Steel or 304 and 440C Stainless Steel
  • Carbon Steel Zinc (Z) Plating is recommended for non-corrosive applications, i.e. hydraulic, pneumatic, etc.
  • Carbon Steel Nickel (NI) Plating is recommended for mildly corrosive environments, i.e. water, mild chemicals, solvents, etc.
  • 304 Stainless Steel (304) is recommended for low pressure corrosive environments.
  • 440C Stainless Steel (440) is a martensitic, high carbon, magnetic stainless steel, heat-treated to maintain a high-pressure rating. Not as corrosion resistant as 300 Series Stainless Steel.
Seal Material:
  • (V) Viton® (Fluorocarbon) - For most petroleum based applications. (-15 deg. F to 250 deg. F)
  • (AL) Aflas® (Tetrafluoroethylene-propylene copolymer) - Better resistance to many individual chemicals. For service in high temperature environments. (Low temperature limitations.) (+32 deg. F to 400 deg. F)
  • (PFA) PFA Teflon® - High resistance to many individual chemicals where Teflon seals are required. (1,500 max psi) (-15 deg. F to 400 deg. F)
  • (ETP) Extreme Viton® - High resistance to many individual chemicals. (-6ºF to 437ºF)
Part Number Material Seal Overall
Length		 Dim.
B		 Wrench/Hex Port T1 Stem T2 SWG.
Radius		 Max
PSIG		 Through
Hole
9SS4MJ4XMJ4-Z-V Zinc Viton 2.837" 2.325" 0.625" 7/16-20 UN 7/16-20 UN 1.454" 3500 PSIG 0.172"
9SS4MJ4XMJ4-Z-AL Zinc AFLAS
9SS4MJ4XMJ4-Z-PFA Zinc Teflon
9SS4MJ4XMJ4-Ni-V Electroless Nickel Viton
9SS4MJ4XMJ4-Ni-AL Electroless Nickel AFLAS
9SS4MJ4XMJ4-Ni-PFA Electroless Nickel Teflon
9SS4MJ6XMJ6-Z-V Zinc Viton 2.857" 2.345" 0.625" 9/16-18 UN 9/16-18 UN 1.454" 3500 PSIG 0.250"
9SS4MJ6XMJ6-Z-AL Zinc AFLAS
9SS4MJ6XMJ6-Z-PFA Zinc Teflon
9SS4MJ6XMJ6-Z-ETP Zinc Extreme Viton®
9SS4MJ6XMJ6-Ni-V Electroless Nickel Viton
9SS4MJ6XMJ6-Ni-AL Electroless Nickel AFLAS
9SS4MJ6XMJ6-Ni-PFA Electroless Nickel Teflon
9SS4MJ6XMJ6-Ni-ETP Electroless Nickel Extreme Viton®
9SS8MJ8XMJ8-Z-V Zinc Viton 3.070" 2.523" 1.000" 3/4-16 UN 3/4-16 UN 1.712" 3500 PSIG 0.297"
9SS8MJ8XMJ8-Z-AL Zinc AFLAS
9SS8MJ8XMJ8-Z-PFA Zinc Teflon
9SS8MJ8XMJ8-Z-ETP Zinc Extreme Viton®
9SS8MJ8XMJ8-Ni-V Electroless Nickel Viton
9SS8MJ8XMJ8-Ni-AL Electroless Nickel AFLAS
9SS8MJ8XMJ8-Ni-PFA Electroless Nickel Teflon
9SS8MJ8XMJ8-Ni-ETP Electroless Nickel Extreme Viton®
9SS8MJ10XMJ10-Z-V Zinc Viton 3.200" 2.623" 1.000" 7/8-14 UN 7/8-14 UN 1.978" 3500 PSIG 0.297"
9SS8MJ10XMJ10-Z-AL Zinc AFLAS
9SS8MJ10XMJ10-Z-PFA Zinc Teflon
9SS8MJ10XMJ10-Z-ETP Zinc Extreme Viton®
9SS8MJ10XMJ10-Ni-V Electroless Nickel Viton
9SS8MJ10XMJ10-Ni-AL Electroless Nickel AFLAS
9SS8MJ10XMJ10-Ni-PFA Electroless Nickel Teflon
9SS8MJ10XMJ10-Ni-ETP Electroless Nickel Extreme Viton®
9SS12MJ12XMJ12-Z-V Zinc Viton 3.534" 2.885" 1.125" 1-1/16-12 UN 1-1/16-12 UN 2.288" 3500 PSIG 0.385"
9SS12MJ12XMJ12-Z-AL Zinc AFLAS
9SS12MJ12XMJ12-Z-PFA Zinc Teflon
9SS12MJ12XMJ12-Z-ETP Zinc Extreme Viton®
9SS12MJ12XMJ12-Ni-V Electroless Nickel Viton
9SS12MJ12XMJ12-Ni-AL Electroless Nickel AFLAS
9SS12MJ12XMJ12-Ni-PFA Electroless Nickel Teflon
9SS12MJ12XMJ12-Ni-ETP Electroless Nickel Extreme Viton®
9SS16MJ16XMJ16-Z-V Zinc Viton 4.275" 3.482" 1.375" 1-5/16-12 UN 1-5/16-12 UN 2.384" 3500 PSIG 0.550"
9SS16MJ16XMJ16-Z-AL Zinc AFLAS
9SS16MJ16XMJ16-Z-PFA Zinc Teflon
9SS16MJ16XMJ16-Z-ETP Zinc Extreme Viton®
9SS16MJ16XMJ16-Ni-V Electroless Nickel Viton
9SS16MJ16XMJ16-Ni-AL Electroless Nickel AFLAS
9SS16MJ16XMJ16-NI-PFA Electroless Nickel Teflon
9SS16MJ16XMJ16-NI-ETP Electroless Nickel Extreme Viton®
9SS20MJ20XMJ20-Z-V Zinc Viton 4.845" 3.835" 1.750" 1-5/8-12 UN 1-5/8-12 UN 2.970" 3500 PSIG 0.827"
9SS20MJ20XMJ20-Z-AL Zinc AFLAS
9SS20MJ20XMJ20-Z-PFA Zinc Teflon
9SS20MJ20XMJ20-Z-ETP Zinc Extreme Viton®
9SS20MJ20XMJ20-Ni-V Electroless Nickel Viton
9SS20MJ20XMJ20-Ni-AL Electroless Nickel AFLAS
9SS20MJ20XMJ20-Ni-PFA Electroless Nickel Teflon
9SS20MJ20XMJ20-Ni-ETP Electroless Nickel Extreme Viton®
9SS24MJ24XMJ24-Ni-V Electroless Nickel Viton 5.840" 4.710" 2.000" 1-7/8-12 UN 1-7/8-12 UN 3.097" 3500 PSIG 0.944"
9SS24MJ24XMJ24-Ni-AL Electroless Nickel AFLAS
9SS24MJ24XMJ24-Ni-PFA Electroless Nickel Teflon
9SS24MJ24XMJ24-Ni-ETP Electroless Nickel Extreme Viton®