Skip to content
Login for the best B2B Wholesale Experience.
Login for the best B2B Wholesale Experience.
10004B-605 Weatherhead by Danfoss | Female JIC 37° Swivel Field Attachable Push-On Fitting | 100 'B' Series Barb-Tite | -05 Female JIC 37° Swivel x -04 Push-On Hose Barb | Brass
10004B-605 Weatherhead by Danfoss | Female JIC 37° Swivel Field Attachable Push-On Fitting | 100 'B' Series Barb-Tite | -05 Female JIC 37° Swivel x -04 Push-On Hose Barb | Brass
10004B-605 Weatherhead by Danfoss | Female JIC 37° Swivel Field Attachable Push-On Fitting | 100 'B' Series Barb-Tite | -05 Female JIC 37° Swivel x -04 Push-On Hose Barb | Brass
10004B-605 Weatherhead by Danfoss | Female JIC 37° Swivel Field Attachable Push-On Fitting | 100 'B' Series Barb-Tite | -05 Female JIC 37° Swivel x -04 Push-On Hose Barb | Brass

10004B-605 Weatherhead by Danfoss | Female JIC 37° Swivel Field Attachable Push-On Fitting | 100 'B' Series Barb-Tite | -05 Female JIC 37° Swivel x -04 Push-On Hose Barb | Brass

$9.00 - $9.00
$9.00
$9.00 - $9.00
$9.00

Weatherhead by Danfoss
Push-On Field Attachable Fitting - 100 'B' Series Barb-Tite - Female JIC 37° Swivel - Straight

Ideal Fitting for low pressure shop or service air lines. Often used for low pressure lube and oil lines.

Easy to assemble - just push the Fitting into the hose. No clamps needed.
Specifications for Variant SKU: 10004B-605 Danfoss
Shape (Orientation): Straight
Ends Configuration: 5/16in Female JIC, 1/4in Push-On Hose Barb
Material(s): Brass
Special Properties: Swivel
Compatible with the following Series: H100 Series  |   H101 Series  |   H201 Series  |   H332 Series  |   35FH Series
Note:
  • Pressure: Determined by maximum working pressure for hose size.
  • CAUTION: Sealing integrity may be damaged by the use of clamps.
  • Label Set: FS-500
Material:
  • CA360 Brass
Compatible Hose:
  • H100, H101, H201, H332, 35FH
Assembly instructions:
  • To determine the correct length of hose, subtract the cut-off factor for each end Fitting from the overall length of assembly.
  • 1. Lubricate insert.
  • 2. Hold hose at angle as shown and push on and up over first barb.
  • 3. Continue to push straight on until hose is seated under protective plastic cap. (Keep hand back from hose end area so that hose can expand.)
  • Assembly Lubricant:
Disassembly instructions:
  • 1. Split hose as shown. Do not cut completely through hose. Sealing edge of barb could be damaged.
  • 2. Bend hose and remove with quick pull.
Brass
Part Number 		Hose
I.D.		 Tube
Size		 Thread
Size		 A Hose Cut-off
Factor		 Hole
Diameter		 Hex
F
10004B-604* 1/4" 1/4" 7/16-20 1.38" 0.74" 0.172" 9/16"
10004B-605* 1/4" 5/16" 1/2-20 1.42" 0.81" 0.172" 5/8"
10005B-605* 5/16" 5/16" 1/2-20 1.54" 0.83" 0.234" 11/16"
10006B-605* 3/8" 5/16" 1/2-20 1.60" 0.88" 0.297" 11/16"
10006B-606 3/8" 3/8" 9/16-18 1.66" 0.88" 0.297" 11/16"
10008B-608* 1/2" 1/2" 3/4-16 2.06" 1.06" 0.391" 7/8"
10010B-610* 5/8" 5/8" 7/8-14 2.67" 1.19" 0.484" 1"
10012B-610* 3/4" 5/8" 7/8-14 2.69" 1.25" 0.511" 1"
10012B-612 3/4" 3/4" 1-1/16-12 2.69" 1.19" 0.609" 1-1/4"

* Swivel nuts are universal - both SAE 37° and 45° connections.

Note: Drawings may differ from actual parts.

Danfoss (Eaton - Aeroquip)

Danfoss (Eaton - Aeroquip)

Danfoss is a global technology leader in power management solutions that make electrical, hydraulic and mechanical power operate more efficiently, reliably, safely and sustainably. Danfoss hydraulic pumps, motors, transmissions, valves, cylinders, controls, hose and fittings offer a unique combination of proven technology and innovative design that translates directly into reliable performance and enhanced uptime.

Shop Parts by Danfoss (Eaton - Aeroquip)