Skip to content
Login for the best B2B Wholesale Experience.
Login for the best B2B Wholesale Experience.
10219 (10-219) by Midland | SAE 45° Flare Fitting | Male Branch Forged | 5/8" Male SAE 45° Flare x 5/8" Male SAE 45° Flare x 3/4" Male NPT | Tee | Brass

10219 (10-219) by Midland | SAE 45° Flare Fitting | Male Branch Forged | 5/8" Male SAE 45° Flare x 5/8" Male SAE 45° Flare x 3/4" Male NPT | Tee | Brass

Save $12.20 Save $12.20
$30.50
$30.50 - $30.50
$30.50
$18.30
$18.30 - $18.30
$18.30

Midland Industries
Brass Fitting - SAE 45° Flare - Male Branch Tee - Brass
Specifications for Variant SKU: 10219 Midland
Shape (Orientation): Tee
Ends Configuration: 5/8in Male SAE 45 Flare, 5/8in Male SAE 45 Flare, 3/4in Male NPT, Some Ends Match
Material(s): Brass
Applicable Specs & Approvals: ASA, ASME, SAE, MS (Military Standards)
Applications: LP and Natural Gas, Flammable Liquids, Instrumentation, Refrigeration, Power Steering, Hydraulic and Pneumatic Systems. Used With: Copper, Brass, Aluminum and Steel hydraulic tubing that can be flared.
SAE Rating: SAE# 010425 Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military standards).
Vibration: Good resistance - use long nut when greater vibration resistance is required. Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures
Tolerance: +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Lead Free: Not Lead Free
Working Pressure Ranges:
  • Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 730F with copper tubing:
Assembly Instructions:
  • 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square.
  • 2) Slide nut on tube. Threaded end "A" of nut must face out.
  • 3) Flare end of tube with a 450 flaring tool.
    • A) Measure flare diameter
    • B) Examine flare for excessive thin out.
  • 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.
  • 5) Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn.
  • Note: Do not over-torque as it may damage the fitting or split the tubing at the flare.
Tube OD 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"
Thread Size B 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 11/16-16 3/4-16 7/8-14 1-1/16-14
Crossover Series:
45R 245 405 T1 145F 45
Part Number Male Flare (1) x Male Flare (2) x Male NPT (3) A B Body Size Approx. Weight
(Lbs.)
10203
(10-203)		 3/16" x 3/16" x 1/8" 0.75" 0.75" 0.36" 0.10
10204
(10-204)		 1/4" x 1/4" x 1/8" 0.78" 0.75" 0.36" 0.05
10205
(10-205)		 1/4" x 1/4" x 1/4" 0.88" 0.88" 0.44" 0.08
10206
(10-206)		 1/4" x 1/4" x 3/8" 0.92" 1.00" 0.47" 0.10
10207
(10-207)		 5/16" x 5/16" x 1/8" 0.89" 0.78" 0.44" 0.08
10208
(10-208)		 5/16" x 5/16" x 1/4" 0.94" 0.94" 0.44" 0.08
10209
(10-209)		 3/8" x 3/8" x 1/8" 1.00" 0.91" 0.44" 0.14
10210
(10-210)		 3/8" x 3/8" x 1/4" 1.00" 0.94" 0.44" 0.12
10211
(10-211)		 3/8" x 3/8" x 3/8" 1.00" 1.00" 0.47" 0.13
10212
(10-212)		 3/8" x 3/8" x 1/2" 1.12" 1.22" 0.69" 0.22
10213
(10-213)		 1/2" x 1/2" x 1/4" 1.16" 1.00" 0.59" 0.20
10214
(10-214)		 1/2" x 1/2" x 3/8" 1.16" 1.14" 0.59" 0.19
10215
(10-215)		 1/2" x 1/2" x 1/2" 1.22" 1.22" 0.69" 0.24
10216
(10-216)		 1/2" x 1/2" x 3/4" 1.38" 1.41" 0.88" 0.22
10217
(10-217)		 5/8" x 5/8" x 3/8" 1.38" 1.25" 0.69" 0.24
10218
(10-218)		 5/8" x 5/8" x 1/2" 1.41" 1.31" 0.69" 0.29
10219
(10-219)		 5/8" x 5/8" x 3/4" 1.41" 1.41" 0.88" 0.36
10220
(10-220)		 3/4" x 3/4" x 1/2" 1.63" 1.59" 0.88" 0.49
10221
(10-221)		 3/4" x 3/4" x 1/2" - - - 0.48
Midland Industries

Midland Industries

Midland Industries is a family of brands recognizable industry wide. Midland is a supplier of brass fittings, valves, and accessories for hose, pipe and tube in brass, bronze, stainless steel, steel, malleable iron, and plastics.

Shop Parts by Midland Industries