Skip to content
Login for the best B2B Wholesale Experience.
Login for the best B2B Wholesale Experience.
10494 (10-494) Midland SAE 45° Flare Fitting - Forged Swivel 90° Elbow - 3/8" Male SAE 45° Flare x 3/8" Female SAE 45° Flare - Brass

10494 by Midland | SAE 45° Flare Fitting | Forged Swivel | 3/8" Male SAE 45° Flare x 3/8" Female SAE 45° Flare | 90° Elbow | Brass

Save $2.25 Save $2.25
$20.22
$20.22 - $20.22
$20.22
$17.97
$17.97 - $17.97
$17.97

Midland Industries
Brass Fitting - SAE 45° Flare - Forged Swivel 90° Elbow - Brass

Inventory @ Manufacturers Warehouse: 1686 Units
Specifications for Variant SKU: 10494 Midland
Shape (Orientation): 90 Degree
Ends Configuration: 3/8in Male SAE 45 Flare, 3/8in Female SAE 45 Flare
Material(s): Brass
Applicable Specs & Approvals: Applicable ASA Standards, Applicable ASME Standards, Applicable SAE Standards, Applicable Military Standards

SPECIFICATIONS

Applications: LP and Natural Gas, Flammable Liquids, Instrumentation, Refrigeration, Power Steering, Hydraulic and Pneumatic Systems. Used With: Copper, Brass, Aluminum and Steel hydraulic tubing that can be flared.
SAE Rating: N/A Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military standards).
Vibration: Good resistance - use long nut when greater vibration resistance is required. Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures
Tolerance: +/- .03 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Lead Free: Not Lead Free
Working Pressure Ranges:
  • Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 730F with copper tubing:
Assembly Instructions:
  • 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square.
  • 2) Slide nut on tube. Threaded end "A" of nut must face out.
  • 3) Flare end of tube with a 450 flaring tool.
    • A) Measure flare diameter
    • B) Examine flare for excessive thin out.
  • 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.
  • 5) Tighten assembly with wrench until a solid feeling is encountered. From that point, apply a one-sixth turn.
  • Note: Do not over-torque as it may damage the fitting or split the tubing at the flare.
Tube OD 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4"
Thread Size B 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 11/16-16 3/4-16 7/8-14 1-1/16-14
Crossover Series:
701 ES4
Part Number Male Flare x Female Flare A B Hex Approx. Weight
(Lbs.)
10493
(10-493) 		1/4" 0.93" 0.86" 0.563" 0.12
10494
(10-494) 		3/8" 1.13" 1.1" 0.75" 0.20
10495
(10-495) 		1/2" 1.29" 1.20" 0.88" 0.25
10496
(10-496) 		5/8" 1.50" 1.30" 1.00" 0.37
10497
(10-497) 		3/4" 1.83" 1.60" 1.25" 0.54

Dimension data can change without notice

Midland Industries

Midland Industries

Midland Industries is a family of brands recognizable industry wide. Midland is a supplier of brass fittings, valves, and accessories for hose, pipe and tube in brass, bronze, stainless steel, steel, malleable iron, and plastics.

Shop Parts by Midland Industries