Skip to content
Login for the best B2B Wholesale Experience.
Login for the best B2B Wholesale Experience.
12094 (12-094) Midland Inverted Flare Fitting - Plug - 3/8" Male Inverted Flare - Steel

12094 by Midland | Inverted Flare Fitting | Plug | 3/8" Male Inverted Flare | Steel

Save $0.25 Save $0.25
$2.26
$2.26 - $2.26
$2.26
$2.01
$2.01 - $2.01
$2.01

Midland Industries
Brass Fitting - Inverted Flare Fitting - Plug - Male Inverted Flare

Cored

Inventory @ Manufacturers Warehouse: 1198 Units
Specifications for Variant SKU: 12094 Midland
Ends Configuration: 3/8in Male Inverted Flare
Material(s): Steel
Applicable Specs & Approvals: Applicable ASA Standards, Applicable ASME Standards, Applicable SAE Standards, Applicable Military Standards

SPECIFICATIONS

Applications: Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas. Used With: Copper, brass, aluminum and steel hydraulic tubing that can be flared.
SAE Rating: SAE# 040109 Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military Standards).
Vibration: Excellent resistance. Temperature Range: -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures.
Advantages: Very low cost and reusable. Seats and threads are internal and protected. Compact, excellent vibration life. Short nut affords very close tube bends. Tolerance: +/- .03 on all dimensions.
Working Pressure Ranges:
  • Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73°F with copper tubing:
Assembly Instructions:
  • 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square.
  • 2) Slide nut on tube. Threaded end "A" of nut must face out.
  • 3) Flare end of tube with a 450 flaring tool.
    • A) Measure flare diameter
    • B) Examine flare for excessive thin out.
    • C) On thin wall, welded or brazed tubing, use double flare to prevent pinch-off and cracked flares.
  • 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.
Tube OD 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 5/8" 3/4" 7/8" 1"
Thread OD
(Threads per inch)		 5/16-28 3/8-24 7/16-24 1/2-20 5/8-18 11/16-18 3/4-18 7/8-18 1-1/16-16 1-3/16-16 1-5/16-16
Standard Metric Threads:
Description
Tube Size		 Thread OD Crest
(Pitch)		 Thread
Description
Japanese 3/16" 10mm 1.0mm M10 x 1.0
European 3/16" 10mm 1.0mm M10 x 1.0
GM 6mm 12mm 1.0mm M12 x 1.0
Fuel 5/16" 14mm 1.5mm M14 x 1.5
Fuel 3/8" 16mm 1.5mm M16 x 1.5
Measuring Metric Threads: Measure the O.D. of the threads and the crest to crest distance (pitch) in millimeters between threads.
Crossover Series:
391N 391F 106 41IP 131 2131
Part Number Male Inverted Flare A Hex Approx. Weight
(Lbs.)
Steel
12091
(12-091)		 3/16" 0.53" 0.37" 0.01
12092
(12-092)		 1/4" 0.54" 0.43" 0.02
12093
(12-093)		 5/16" 0.59" 0.50" 0.03
12094
(12-094)		 3/8" 0.66" 0.62" 0.04
Brass
12095 3/8" 0.66" 0.63" 0.04
12096 1/2" 0.82" 0.75" 0.07
12097 5/8" 0.90" 0.87" 0.10
12098 3/4" 0.95" 1.07" 0.17
Midland Industries

Midland Industries

Midland Industries is a family of brands recognizable industry wide. Midland is a supplier of brass fittings, valves, and accessories for hose, pipe and tube in brass, bronze, stainless steel, steel, malleable iron, and plastics.

Shop Parts by Midland Industries