2603685-50 VITUBE® by NewAge | Viton™ Tubing | Type B | 5/16" ID x 7/16" OD x 1/16" Wall | Black | 50ft

Save $286.67

$716.67

$716.67 - $716.67

$716.67

$430.00

$430.00 - $430.00

$430.00

PRODUCT DESCRIPTION

NewAge Industries - VITUBE&reg - Flexible Tubing of Viton™ - Type B (60 Hardness, Shore A)

Package Quantity: 50 FT

Specifications for Variant SKU: 2603685-50 NewAge \| 50 \|
Brand:	Vitube
Hose Color(s):	Black
Internal Diameter:	0.3125in
Outer Diameter:	0.4375in
Tubing Construction:	Viton

Other Features:
Application:	Appliances, Automotive Fluids, Cable Jacketing, Chemicals, Fuel & Oil, Gaskets, Seals, O-Rings, Hot Lubrication, Model Engine Exhaust, Peristaltic Pumps, Solvents	Tube:	Viton™
Reinforcement:	Unreinforced	Cover:	N/A
Temperature Range:	400°F	Color:	Black
Opacity:	Opaque	Specifications	N/A
Made of 100% pure Viton, a high performance synthetic rubber Excellent temperature resistance: -40°F (-30°F for Type A) to 400°F continuously; 600°F periodically Offers the widest range of fluid and chemical resistance of any commercial rubber Excellent resistance to oils, fuels, lubricants, and most mineral acids Also resistant to many aliphatic and aromatic hydrocarbons such as carbon tetrachloride, benzene, toluene, and xylene Excellent resistance to environmental exposure such as sunlight and ozone Available in 75 and 60 Shore A durometers (Type A and Type B) Made in the USA
Notes:
VITUBE's main attributes include exceptional chemical resistance at elevated temperatures. It has withstood continuous service temperatures of 600°F for 48 hours and 500°F for 1000 hours while maintaining its mechanical properties. Care should be taken, however, at these elevated temperatures. Tests should be performed to determine application suitability. VITUBE possesses the high resiliency of an elastomer as well as the good mechanical properties of conventional synthetic rubbers. The heat and chemical resistance factors, however, usually go far beyond the range of other rubbers. The 60A durometer compound is specially formulated for use in peristaltic pumps. All VITUBE formulations are produced with 100% Viton fluoroelastomers (chemical name: fluorocarbon FKM) and are matte black in color. VITUBE contains no regrind material nor blends of other elastomers. If accidental burning of VITUBE occurs, extreme caution should be taken due to Hydrogen Fluoride and other decomposition products. Avoid inhalation of vapors liberated at service temperatures above 392°F. If your application calls for harder VITUBE, 90A durometer is available - contact support.

Physical Properties**
	Type A	Type B
Hardness, Shore A, ±5	75	60
Tensile Strength, psi	1600	1450
Elongation at Break, %	150	350
Brittle Temperature, °F	-30°F	-40°F
Maximum Recommended Operating Temp., °F	400°F	400°F

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.

Tolerances
0"	.100"	±.010
.101"	.160"	±.013
.161"	.250"	±.016
.251"	.400"	±.020
.401"	.630"	±.025
.631"	1.000"	±.032

Part Number	Inside Diameter (in.)	Outside Diameter (in.)	Wall Thickness (in.)	Length
2600185-100	0.031" (1/32")	0.094" (3/32")	0.031" (1/32")	100 ft
2600535-100	0.063" (1/16")	0.125" (1/8")	0.031" (1/32")	100 ft
2600710-50	0.063" (1/16")	0.188" (3/16")	0.063" (1/16")	50 ft
2600710-100	0.063" (1/16")	0.188" (3/16")	0.063" (1/16")	100 ft
2600885-50	0.063" (1/16")	0.250" (1/4")	0.094" (3/32")	50 ft
2601235-50	0.125" (1/8")	0.250" (1/4")	0.063" (1/16")	50 ft
2601235-100	0.125" (1/8")	0.250" (1/4")	0.063" (1/16")	100 ft
2601410-100	0.125" (1/8")	0.313" (5/16")	0.094" (3/32")	100 ft
2601935-50	0.188" (3/16")	0.313" (5/16")	0.063" (1/16")	50 ft
2601935-100	0.188" (3/16")	0.313" (5/16")	0.063" (1/16")	100 ft
2602810-50	0.250" (1/4")	0.375" (3/8")	0.063" (1/16")	50 ft
2602810-25	0.250" (1/4")	0.375" (3/8")	0.063" (1/16")	25 ft
2602985-50	0.250" (1/4")	0.438" (7/16")	0.094" (3/32")	50 ft
2603685-50	0.313" (5/16")	0.438" (7/16")	0.063" (1/16")	50 ft
2603860-50	0.375" (3/8")	0.500" (1/2")	0.063" (1/16")	50 ft
2604210-25	0.375" (3/8")	0.625" (5/8")	0.125" (1/8")	25 ft
2604560-25	0.500" (1/2")	0.625" (5/8")	0.063" (1/16")	25 ft

* Limited stock item; lead times and minimums may apply -- contact support.

NewAge Industries

NewAge Industries is a leading independent, employee-owned manufacturer of fluid transfer systems that produce high-quality tubing, hose, fittings, clamps, and accessories and offers expert project guidance and services.

As a reliable provider that offers an exceptional customer experience, a culture of social responsibility, and a focus on sustainability, NewAge helps businesses engineer products that create a positive global impact.

Shop Parts by NewAge Industries