Skip to content
300PIHY Banjo 3" Cast Iron Pump with 21 HP Hydraulic Motor

300PIHY by Banjo | Centrifugal Pumps | 3" Cast Iron Pump with 21 HP Hydraulic Motor

Save $261.53 Save $261.53
$2,961.96
$2,961.96 - $2,961.96
$2,961.96
$2,700.43
$2,700.43 - $2,700.43
$2,700.43

Banjo Self-Priming Centrifugal Pumps
3" Cast Iron Pumps with Hydraulic Motors & Replacement Parts
Can I get a discount on my purchase?

Our listed prices are our lowest possible price with current costing but when volumes/value are high enough sometimes we can pass on a discount from the manufacturer.

Some products have predefined quantity discounts that will apply automatically, those pages have a table near the price describing the discount teirs.

If you feel your purchase quantity of a particular product is very large and want us to investigate with the manufacturer please feel free to Contact Us.

What if my item is out of stock?

All customers get an email regarding the shipping time frame of their purchase, usually within the business day. If your item is in stock we will ship within 1 business day, otherwise, the email will contain a lead time. If you do not receive this email, we recommend checking your email's spam folder. If you have any questions at that point please do not hesitate to Contact Us or chat below!

Can I get free shipping?

Shipping will calculate as free instantly if your order value exceeds $5000.

Some exceptions apply.

Free Freight is only available for the Contiguous USA.

Specifications for Variant SKU: 300PIHY Banjo

SPECIFICATIONS

Application: Fluids, Agriculture, Industrial
Hydraulic Motor Data:
U.S. Gallons/Rev. 0.0038 Cubic Inches/Rev. 0.878
Liters/Rev. 0.0144 Max Hydraulic Pressure 3000 PSI
Min Hydraulic Pressure 600 PSI Inlet Port 1-1/16-12UN-2B
Outlet Port 1-5/16-12UN-2B Minimum GPM Required 9 GPM 2370 RPM
Maximum GPM Required 13 GPM 3450 RPM Ideal GPM Required 9 GPM 3600 RPM
Connection Information
Inlet "A" Port Outlet "B" Port
Supplied check valve is to ensure proper rotation of the Banjo pump. Place check valve in outlet port (marked "B") for proper right hand rotation. It is recommended that a minimum 3/4" inlet line & a minimum 1" outlet line be used. The outlet port must be connected directly back to the hydraulic fluid reservoir & not to any valving, regulators or flow diverters. The outlet port/return line back pressure must not exceed 250 PSI.
Spool Valve Information
Required Outlet Flow Min 9 GPM / Max 13 GPM Required System Pressure Min 600 PSI / Max 3000 PSI
Pump Features:
  • Rugged construction for dependable service
  • Carbon ceramic seal with stainless steel cup and spring with FKM (viton type) rubber
  • Replaceable inlet and outlet flanges
  • Dynamically balanced impeller
Hydraulic Motors:
  • Hydraulic fluid capacity: Minimum 9 Gallons / Maximum 13 Gallons.
  • 21 H.P. Motor
  • Open system
  • Minimum 600 PSI / Maximum 3000 PSI
Notes:
  • CAUTION-WARNING: Please do not run pumps dry, restrict or reduce port sizes or dead head pumps. This could cause component failure to pump.
  • DO NOT USE WITH FLAMMABLE LIQUIDS.
  • Recommendation: Banjo recommends using the motor spool control valve or a suitable equivalent. The lack of such a valve in this circuit may cause failure to the hydraulic motor.
Part Number Description Horsepower
3" Cast Iron Pumps with Hydraulic Motors
300PIHY 3" Cast Iron Pump with 21 HP Hydraulic Motor 21 HP (Made to Order)
Hydraulic Motor Spool Valve
HSV1000 Hydraulic Motor Spool Valve N/A ---
Replacement Parts for 3" Cast Iron Hydraulic Pumps
Item Part Number Description Quantity Required
1 18001 Pump Housing 1
2 18004 Wear Plate 1
3 18106 3/8"-16 x 1.25" HHCS 2
5 18025 FKM (viton type) Mechanical Seal 1
5 18025SD Severe Duty Seal 1
6 18218 3/8"-16 x 24 x 2-1/8" SS Stud 6
7 V20018 3/8" Lock Washer 14
8 V20019 3/8" 16 SS Hex Nut 6
9 18010SS 3/8"-16 x 1.25" HHCS 8
10 18009 EPDM Outlet Gasket 1
11 18008 NPT Outlet Flange 1
12 18012 NPT Inlet Flange 1
13 18013 Inlet/Check EPDM Gasket 1
14 18033 Handle 1
15 18034 5/8"-11 Hex Nut 1
16 13777 3/4" Plug 1
17 12777 1/2" Plug 1
18 18021 Adapter Gasket 1
19 18049 Hydraulic Motor Adapter 1
20 18055 Hydraulic Adapter Shaft 1
21 18502 Bearing SKF 66306-2RS1/C3 1
22 18056 1/2"-13 x 2" HHCS 2
23 18058 1/2" Split Washer 2
25 17010 1/2" - 13 Hex Nut 2
26 HY1012 UM16-45A-HX Hydraulic Motor Assembly 1
27 18029 Clamp Assembly Unkeyed 1
28 13778 O-Ring 1
29 UV15163 O-Ring 1
Not Shown 18100 Repair Kit (Consist of 2, 3, 4, 5, 18) 1
Replacement Parts for 3" Cast Iron Hydraulic Adapter
Item Part Number Description Quantity Required
1 18049 C-Flange Hydraulic Motor Adapter 1
2 18021 Gasket Adapter 1
3 18025 Seal Assembly 1
4 18502 SKF 63306-2RS1/C3 Bearing 1
5 18055 Hydraulic Adapter Shaft Sleeve 1
6 HY1012 Tyrone® UM16 Hydraulic Motor 1
8 18058 1/2" Split Lock Washer 2
9 18056 1/2" - 13" x 2" HHCS Bolt 2
10 17010 1/2" Hex Nut 2
11 18600 Hydraulic Motor Adapter Assembly 1
Not Shown HY1001 Repair Kit 1
Banjo

Banjo

Banjo is a world-class producer of a wide range of mechanical and electrical valves, fittings, and self-priming centrifugal pumps for agriculture and numerous industrial applications that ship to every corner of the globe. Banjo employs an array of molding presses, numerous machining and assembly cells, and an optimized logistics system empowering our production and shipping operations.

Shop Parts by Banjo