| Hose Properties: |
| Applications: |
Automotive, Platen presses, Pharmaceutical, Bus and truck, Reverse osmosis, Hydraulics, Chemical processing, Steam, air, water, Tire manufacturing, Electronics
Steel mills, Food processing, Tank truck transfer, 8500 Series is for applications where flow induced electrostatic charges can occur.
|
SAE Ratings: |
N/A |
| Other Ratings: |
N/A |
Tube: |
Convoluted Teflon Tube |
| Reinforcement: |
304 Stainless Steel Wire Braid |
Cover: |
304 Stainless Steel Wire Braid |
| Operating Parameters: |
-65°F to +400°F (-54°C to +204°C) |
Non-Conductive
Part Number |
Conductive
Part Number |
Hose Size |
Nominal
ID |
Max.
Nominal OD |
Hose ID |
Max.
Operating
Pressure |
Min.
Burst
Pressure |
Min.
Bend
Radius |
Weight |
Vacuum
Service |
| mm |
in |
mm |
in |
bar |
psi |
bar |
psi |
mm |
in |
kg/m |
lbs/ft |
in. Hg |
| 8008 |
8508 |
-8 |
14,5mm |
0.57" |
20,6mm |
0.81" |
1/2" |
103 bar |
1500 psi |
413 bar |
6000 psi |
38,1mm |
1.5" |
0,10 kg/m |
0.23 lbs/ft |
28 In/Hg |
| 8012 |
8512 |
-12 |
21,1mm |
0.83" |
27,9mm |
1.10" |
3/4" |
86 bar |
1250 psi |
345 bar |
5000 psi |
63,5mm |
2.5" |
0,14 kg/m |
0.31 lbs/ft |
28 In/Hg |
| - |
8516 |
-16 |
26,9mm |
1.06" |
34,0mm |
1.34" |
1" |
62 bar |
900 psi |
248 bar |
3600 psi |
76,2mm |
3.00" |
0,19 kg/m |
0.42 lbs/ft |
20 In/Hg |
| 8020 |
8520 |
-20 |
33,3mm |
1.31" |
40,6mm |
1.60" |
1-1/4" |
62 bar |
900 psi |
248 bar |
3600 psi |
88,9mm |
3.5" |
0,24 kg/m |
0.52 lbs/ft |
12 In/Hg |
| 8024 |
8524 |
-24 |
40,1mm |
1.58" |
46,5mm |
1.83" |
1-1/2" |
52 bar |
750 psi |
206 bar |
3000 psi |
114,3mm |
4.5" |
0,27 kg/m |
0.59 lbs/ft |
10 In/Hg |
| 8032 |
8532 |
-32 |
52,3mm |
2.06" |
60,5mm |
2.38" |
2" |
35 bar |
500 psi |
138 bar |
2000 psi |
152,4mm |
6.0" |
0,39 kg/m |
0.86 lbs/ft |
5 In/Hg |
Warning: These hoses can be used to convey hazardous chemicals, steam,
hot liquids or other dangerous materials which can cause death, serious
bodily injury including burns, pressure wounds or chemical exposure if
released accidentally. They should, therefore, only be handled or worked
on by personnel properly trained in the safe handling of the materials or
chemicals conveyed in the hoses.
Bulk / By the Foot: We sell Danfoss hose in "Bulk Length" unless otherwise specified in the title or option selector as "Exact Length". When you buy "Bulk Length" hose you are agreeing to buy
multiple lengths that add up to the length you purchased. If your length can be supplied as a single piece then it will be, but there can be no assurance of this even if you contact us. If you
need a single piece then you can select an "Exact Length" option or Contact Us for a quote.
Warning! Danfoss hose and fittings are engineered to match Danfoss Aeroquip hose and fitting tolerances. The use of Danfoss fittings on hose
supplied by other manufacturers may result in the production of unreliable and unsafe hose assemblies and is neither recommended or authorized by Danfoss Corporation, Murdock Industrial Inc.,
or any other entity. Consult current master catalog for additional warnings and cautions.
