Skip to content
Login for the best B2B Wholesale Experience.
Login for the best B2B Wholesale Experience.
DB600 by Jason Industrial | Double Bolt Hose Clamp | Hose OD Range From: 5-1/2" to 6-1/16" | Plated Ductile Iron

DB600 by Jason Industrial | Double Bolt Hose Clamp | Hose OD Range From: 5-1/2" to 6-1/16" | Plated Ductile Iron

Save $8.77 Save $8.77
$28.87
$28.87 - $28.87
$28.87
$20.10
$20.10 - $20.10
$20.10

Jason Industrial
Double Bolt Hose Clamp

Provides an efficient means of securing couplings for low pressure discharge or suction service.
Specifications for Variant SKU: DB600 Jason
Material(s): Plated Ductile Iron
Minimum Clamp I.D.: 5.50in
Maximum Clamp I.D.: 6.06in
Clamps

Jason Industrial | Double Bolt Hose Clamp

These clamps provide an efficient means of securing couplings for low pressure discharge or suction service. Double bolt hose clamps are sized for hose OD's from 1-5/8" through 17-1/2". As the bolts are tightened, the double-tongue saddles fill the gap between the bolt lugs preventing pinching of the hose OD. Fully tightened, the double bolt clamps secure the full circumference of the hose.

1

What is this product used for?
  • Secures couplings for low pressure discharge or suction service.
2

What are the main product features?
  • As the bolts are tightened, the double-tongue saddles fill the gap between the bolt lugs preventing pinching of the hose OD.
  • Fully tightened, the double bolt clamps secure the full circumference of the hose.
  • Clamps are designed for one-time use.
3

What are the material specifications?
  • Plated ductile iron.
4

What are the Instructions for Installing Double Bolt Hose Clamps?
  • Bolts should be assembled dry.
  • Proper clamp part number should be selected from chart to fit the appropriate size of hose and fully assemble onto a squarely cut hose fully inserted with all components in alignment.
  • Bolts should be hand tightened until resistance is met as the hose is contacting the clamp halves.
  • The bolts should be tightened sequentially one turn at a time to gradually pull the clamp halves evenly.
  • Fully torque the bolts in this manner until the values shown in the chart are achieved.
  • Do not exceed the recommended torque.
  • Hoses will compress (cold flow) over time and periodically the bolts will need to be retorqued for optimum performance of the assembly. It is recommended that this retorquing be done daily for the first week of use, then check monthly as part of maintenance.
  • WARNING! Re-tightening of clamps is necessary before each use. Regular inspection of the assembly is recommended. Always refer to manufacturer’s recommendations for torque and tightening sequence.
5

Which sizes or configurations are available?
Part Number Hose O.D. Range Torquelbf-ft.
From To
DB049 1-5/8" 1-15/16" 15 lb ft
DB060 1-7/8" 2-3/8" 20 lb ft
DB076 2-3/8" 3-1/16" 20 lb ft
DB094 3-1/2" 3-11/16" 40 lb ft
DB400 3-1/2" 4" 40 lb ft
DB463 4-1/16" 4-7/16" 40 lb ft
DB525 4-3/16" 5" 60 lb ft
DB550 5" 5-1/2" 60 lb ft
DB600 5-1/2" 6-1/16" 60 lb ft
DB675 6-1/8" 6-7/8" 60 lb ft
DB769 6-15/16" 7-5/8" 60 lb ft
DB818 7-11/16" 8-3/16" 125 lb ft
DB875 8-1/4" 8-7/8" 125 lb ft
DB988 8-15/16" 9-7/8" 125 lb ft
DB1125 9-15/16" 11-3/8" 125 lb ft
DB1275 11-3/16" 13" 125 lb ft
DB1360 12-3/16" 14" 200 lb ft
DB1450 13-3/16" 15" 200 lb ft
DB1700 15-1/16" 17-1/2" 260 lb ft

Jason Industrial

Founded in 1958 in Fairfield, NJ, Jason Industrial quickly gained a solid reputation as a go to source for both industrial hose and power transmission belts. Jason Industrial offers a comprehensive portfolio of industrial hose, couplings and accessories along with hydraulic hose, fittings and crimping equipment.

Shop Parts by Jason Industrial