Skip to content
Login for the best B2B Wholesale Experience.
Login for the best B2B Wholesale Experience.
SDB800CW by Jason Industrial | Spiral Double Bolt Hose Clamp for Corrugated Hose | Clockwise | Fits: 8" Hose OD

SDB800CW by Jason Industrial | Spiral Double Bolt Hose Clamp for Corrugated Hose | Clockwise | Fits: 8" Hose OD

Save $13.14 Save $13.14
$36.08
$36.08 - $36.08
$36.08
$22.94
$22.94 - $22.94
$22.94

Jason Industrial
Spiral Double Bolt Hose Clamp for Corrugated Hose

The spiral double bolt clamp fits between the convolutions on corrugated hose. When fully tightened, the wire secures the full circumference of the outside hose wall - not the convolutions, for a safe, economical and efficient securing method.
Specifications for Variant SKU: SDB800CW Jason
Material(s): Carbon Steel
Maximum Clamp I.D.: 8in
Clamps

Jason Industrial | Spiral Double Bolt Hose Clamp for Corrugated Hose

Clamps (for corrugated hose) manufactured in either clockwise (right hand) or counter clockwise (left hand) design, the spiral double bolt clamp fits between the convolutions on corrugated hose. When fully tightened, the wire secures the full circumference of the outside hose wall - not the convolutions, for a safe, economical and efficient securing method. Consult hose manufacturer for correct convolution direction. Direction of clamp spiral and hose convolution are the same.

1

What is this product used for?
  • Secure clamp for corrugated hose.
2

What are the main product features?
  • Manufactured in either clockwise (right hand) or counter clockwise (left hand) design
  • The spiral double bolt clamp fits between the convolutions on corrugated hose.
  • When fully tightened, the wire secures the full circumference of the outside hose wall - not the convolutions, for a safe, economical and efficient securing method.
3

What are the Instructions for Installing Spiral Double Bolt Hose Clamps?
  • Bolts should be assembled dry.
  • Proper clamp part number should be selected from chart to fit the appropriate size and corrugation direction of hose.
  • Assemble the clamp onto a squarely cut hose fully inserted with all clamp components in alignment.
  • Bolts should be hand tightened until resistance is met as the hose is contacting the clamp saddle and inside of bolt arcs.
  • The bolt ends/nuts should be tightened sequentially one turn at a time to gradually pull the clamp halves evenly.
  • Fully torque the nuts in this manner until the values shown in the chart are achieved. Do not exceed the recommended torque.
  • Hoses will compress (cold flow) over time and periodically the bolts will need to be retorqued for optimum performance of the assembly. It is recommended that this retorquing be done daily for the first week of use, then check monthly as part of maintenance.
  • WARNING! Re-tightening of clamps is necessary before each use. Regular inspection of the assembly is recommended. Always refer to manufacturer’s recommendations for torque and tightening sequence.
4

Which sizes or configurations are available?
Clockwise
Part Number		 Counterclockwise
Part Number		 Hose O.D. Range Torquelbf-ft.
From To
SDB150CW SDB150CCW 1-1/2" 15 lb-ft
SDB200CW SDB200CCW 2" 15 lb-ft
SDB250CW SDB250CCW 2-1/2" 15 lb-ft
SDB300CW SDB300CCW 3" 27 lb-ft
SDB400CW SDB400CCW 4" 27 lb-ft
SDB500CW SDB500CCW 5" 60 lb-ft
SDB600CW SDB600CCW 6" 60 lb-ft
SDB800CW SDB800CCW 8" 60 lb-ft
SDB1000CW SDB1000CCW 10" 60 lb-ft
SDB1200CW SDB1200CCW 12" 60 lb-ft

Jason Industrial

Founded in 1958 in Fairfield, NJ, Jason Industrial quickly gained a solid reputation as a go to source for both industrial hose and power transmission belts. Jason Industrial offers a comprehensive portfolio of industrial hose, couplings and accessories along with hydraulic hose, fittings and crimping equipment.

Shop Parts by Jason Industrial