JD TEST ITEM

Name: JD TEST ITEM
Brand: HoseWarehouse
Availability: OutOfStock

Sold out

$0.00 - $0.00

$0.00

$0.00 - $0.00

$0.00

Identifies six U.S. standards: NPT, NPSM, JIC, SAE 45°, ORFS, and O-Ring Boss.
Male and female ends: Cards check outside and inside diameters, with dash size, nominal size, and TPI charted on each card.
Thread pitch gauge: Reads 11 to 28 TPI plus 1.0, 1.5, and 2.0 mm metric pitch.
Angle gauges: 37°, 45°, 30°/60°, and 12°/24° for telling flares and cone seats apart.
Stays together: Cards and gauge store in a blue vinyl bag for the truck or the bench.

Specifications for Variant SKU:

Spring Driven Hose Reel

Coxreels® P Series “Performance” Hose Reels

Compact single-pedestal spring rewind reels with a factory-tuned cartridge spring motor and all-steel construction, built in the U.S.A. for air, water, oil, grease and hydraulic lines from 300 to 5,000 PSI.

★

Made in the U.S.A.

2-year limited warranty

⚙

Cartridge Spring Motor

Enclosed, removable, stainless spring

▼

300 to 5,000 PSI

Low, medium & high pressure

☐

Mounts Anywhere

Floor, wall, ceiling, bench or vehicle

1

What is the P Series used for?

P Series reels keep a working hose stored, protected and ready at the point of use — shops, service bays, plants, job sites and service trucks. Pick the pressure class that matches your line:

Air
Water
Washdown
Chemical fluid transfer
Oil & lubrication
Grease & hydraulics
Pressure washing

Low pressure (LP) — 300 PSI red PVC hose for air, water and washdown.
Medium pressure (MP) — 2,500–3,000 PSI 1-wire rubber hose for oil, lubrication and chemical transfer.
High pressure (HP) — 4,000–5,000 PSI 2-wire rubber hose for grease, hydraulics and pressure washing.
Less hose (LPL / MPL / HPL) — the same reel without hose, for fitting your own.

2

What are the key specifications?

Construction

Heavy gauge steel, single pedestal

Swivel

90° full-flow NPT; brass (LP/MP), zinc plated steel (HP)

Swivel Seals

Nitrile standard; Viton, EPR & food grade optional

Retraction

Enclosed cartridge spring motor, multi-position lock ratchet

Bearings

1" permanently lubricated precision bearings

Finish

CPC™ powder coat, blue standard

Inlet / Outlet

Female NPT inlet; male NPT on hose (BSP optional)

Max Temperature

150°F (LP/PVC hose), 250°F (MP/HP)

Mounting

Floor, wall, ceiling, bench & vehicle; 4 × Ø0.50" holes, 6.0" x 5.0" pattern

Warranty

24 months limited, parts only

3

What are the main features?

Swivel — 90° full-flow NPT swivel (solid brass on LP/MP, zinc plated steel on HP) for simple seal maintenance and fast hose installation without removing the reel from its mount.
Cartridge Motor — Lubricated and enclosed cartridge-style motor is easily removable for safe and convenient maintenance.
CNC Spun Discs — Heavy duty CNC robotically spun and ribbed discs with rolled edges for greater strength, durability, hose protection and operator safety.
1/4" Steel Base — Sturdy single pedestal design with solid one piece steel base and support post, no weld, for maximum stability.
Multi-Position Guide Arm — Versatile guide arm adjusts to wall, floor, ceiling, and vehicle mounting positions.
Other Features — Chip resistant, rust inhibiting CPC powder coat finish, adjustable solid rubber hose stop and permanently lubricated precision bearings.

4

Which models are available?

Hose I.D. / Max PSI	10 ft	15 ft	20 ft	25 ft	30 ft	35 ft	40 ft	50 ft
Low Pressure — red PVC hose, brass swivel
1/4" · 300	P-LP-110	P-LP-115		P-LP-125	P-LP-130	P-LP-135	P-LP-140	P-LP-150
3/8" · 300	P-LP-310	P-LP-315		P-LP-325	P-LP-330	P-LP-335	P-LP-340	P-LP-350
1/2" · 300		P-LP-415		P-LP-425	P-LP-430			P-LP-450
Low Pressure — less hose, brass swivel
1/4" · 300	P-LPL-110	P-LPL-115		P-LPL-125	P-LPL-130	P-LPL-135	P-LPL-140	P-LPL-150
3/8" · 300	P-LPL-310	P-LPL-315		P-LPL-325	P-LPL-330	P-LPL-335	P-LPL-340	P-LPL-350
1/2" · 300		P-LPL-415		P-LPL-425	P-LPL-430			P-LPL-450
Medium Pressure — 1-wire rubber hose, brass swivel
3/8" · 3,000			P-MP-320	P-MP-325	P-MP-330	P-MP-335
1/2" · 2,500			P-MP-420	P-MP-425	P-MP-430
Medium Pressure — less hose, brass swivel
3/8" · 3,000			P-MPL-320	P-MPL-325	P-MPL-330	P-MPL-335
1/2" · 2,500			P-MPL-420	P-MPL-425	P-MPL-430
High Pressure — 2-wire rubber hose, zinc plated steel swivel
1/4" · 5,000			P-HP-120	P-HP-125	P-HP-130	P-HP-135
3/8" · 4,000			P-HP-320	P-HP-325	P-HP-330
High Pressure — less hose, zinc plated steel swivel
1/4" · 5,000			P-HPL-120	P-HPL-125	P-HPL-130	P-HPL-135
3/8" · 4,000			P-HPL-320	P-HPL-325	P-HPL-330

Inlet is female NPT and the hose end is male NPT, both matching the hose I.D. Capacity is the length of hose the reel holds; less-hose models ship without hose.

5

What are the reel dimensions?

Models	W	H	L	X	M	Disc Ø
P-LP(L) -110, -115, -125, -130, -135	5.875"	14.875"	13.5"	5"	3"	9.19"
P-LP(L) -310, -315, -325	6.5"	14.875"	13.5"	5"	3"	9.69"
P-LP(L) -140, -150, -330, -335, -340, -350	6.75"	18.625"	17.125"	6"	4"	11.88"
P-LP(L) -415, -425, -430, -450; all P-MP(L); all P-HP(L)	7"	18.625"	17.125"	6"	4"	11.13"

Letters refer to the dimension drawing on the P Series spec sheet. X = base depth, M = guide arm offset. Base mounting pattern is 6.0" x 5.0" with Ø0.50" holes on every frame.

6

Which factory options can be ordered?

Options are built to order by Coxreels and are quoted individually. Example: P-LP-350-W-BP-RVC = P-LP-350, wall mount, blue PVC hose, red finish, Viton swivel seal, constant tension. Use the quote form on this page for pricing and lead time on any optioned reel.

Code	Option	Notes
Mounting position (suffix after model)
Standard	Floor / ceiling mount	no suffix
-D	Down mount
-B	Bottom / truck mount
-W	Wall / truck mount
Hose upgrade (LP with hose only)
-OG	Black oil/grease resistant (neoprene / nitrile)	300 PSI, -20 to 212°F
-RH	Red EPDM	300 PSI, -40 to 212°F
-BH	Black EPDM	300 PSI, -40 to 212°F
-BP	Blue PVC	300 PSI, -15 to 150°F
-YP	Yellow PVC	300 PSI, -15 to 150°F
Configuration code: [color][swivel][misc] — X = standard
Color	G gray, K gloss black, R red — min. 1	C wrinkle black, W white, N green — min. 25
Swivel	V Viton, E EPR, A/B/C stainless (Nitrile/Viton/EPR)	G/H/I BSP, L/M/N stainless BSP, Y/W food grade, Z less swivel
Misc	B bend restrictor (LP), C constant tension, S solid roller	K/L air tool kit (LP 3/8" & 1/2"), R reverse, N non-sparking

7

Which accessories fit these reels?

Part #	Accessory	Fits
15720	Swing Bracket	P-LP(L) -110, -115, -125, -130, -135, -140, -150, -325, -330, -335, -340, -350, -415, -425, -430, -450; all P-MP(L); all P-HP(L)
15721	Swivel Bracket	P-LP(L) -110, -115, -125, -130, -135, -140, -150, -325, -330, -335, -340, -350, -415, -425, -430, -450; all P-MP(L); all P-HP(L)
15723	EZ-Up Bracket	P-LP(L) -110, -115, -125, -130, -135, -140, -150, -325, -330, -335, -340, -350, -415, -425, -430, -450; all P-MP(L); all P-HP(L)
15724	EZ-Up "I" or "H" Beam Adapter	P-LP(L) -110, -115, -125, -130, -135, -140, -150, -325, -330, -335, -340, -350, -415, -425, -430, -450; all P-MP(L); all P-HP(L)
MR-1	Overhead Mounting Bracket	P-LP(L) -110, -115, -125, -130, -135, -140, -150, -325, -330, -335, -340, -350, -415, -425, -430, -450; all P-MP(L); all P-HP(L)
5150-1.5	Inlet Hose Assemblies	P-LP(L) -125, -130, -135, -140, -150
5153-1.5	Inlet Hose Assemblies	P-LP(L) -325, -330, -335, -340, -350
5154-1.5	Inlet Hose Assemblies	P-LP(L) -415, -425, -430, -450
5224-1.5	Inlet Hose Assemblies	P-MP(L) -320, -325, -330, -335
5256-1.5	Inlet Hose Assemblies	P-MP(L) -420, -425, -430
5304-1.5	Inlet Hose Assemblies	P-HP(L) -120, -125, -130, -135
5336-1.5	Inlet Hose Assemblies	P-HP(L) -320, -325, -330
15717	Garden Hose Kit	P-LP(L) -415, -425, -430, -450
1671	90° Elbows	P-MP(L) -420, -425, -430
208	90° Elbows	P-LP(L) -310, -315, -325, -330, -335, -340, -350
222	90° Elbows	P-LP(L) -415, -425, -430, -450
500	90° Elbows	P-MP(L) -320, -325, -330, -335
6088	90° Elbows	P-LP(L) -110, -115, -125, -130, -135, -140, -150
616	90° Elbows	P-HP(L) -120, -125, -130, -135
617	90° Elbows	P-HP(L) -320, -325, -330
10759-1	Quick Disconnects	P-LP(L) -110, -115, -125, -130, -135, -140, -150
10759-2	Quick Disconnects	P-LP(L) -310, -315, -325, -330, -335, -340, -350
237-1	Hose Guards	P-LP(L) -110, -115, -125, -130, -135, -140, -150, -310, -315, -325, -330, -335, -340, -350; P-MP(L) -320, -325, -330, -335; all P-HP(L)
398-1	Hose Guards	P-LP(L) -415, -425, -430, -450; P-MP(L) -420, -425, -430
131	Hose Stops	P-LP(L) -110, -115, -125, -130, -135, -140, -150; P-HP(L) -120, -125, -130, -135
131-3	Hose Stops	P-LP(L) -310, -315, -325, -330, -335, -340, -350; P-MP(L) -320, -325, -330, -335; P-HP(L) -320, -325, -330
131-4	Hose Stops	P-LP(L) -415, -425, -430, -450; P-MP(L) -420, -425, -430

8

Where can I find replacement parts?

Coxreels P Series exploded parts drawing EXP-10 with numbered item callouts

Item numbers match the callouts on drawing EXP-10. Parts common to every P Series reel:

Item	Part #	Description	Qty
9	1776-3	Hub bearing assembly	1
10	1620	Shoulder bolt, 1/2" x 1-1/2"	1
11	640-1-SS	Locking cam	1
12	274-1-SS	Dog spring	1
13	1956	Axle	1
14	437	Lock washer, 3/8"	1
15	184	Jam nut, 3/8-16	1
16	1953	Carriage bolt, 1/4-20 x 1.5	3
17	125	Keps nut, 1/4-20	3
20	245	Truss head screw, 10-32 x 3/8"	2
21	438	Lock washer, 5/8"	1
22	3584	Nut, 5/8-11	1
23	111	Lock nut, 5/16-18	3
24	312	Bolt, 5/16-18	3
25	130	Keps nut, 10-32	4
26	111-1	Lock nut, 5/16-18, low profile	4
29	1924	Locking ring	1
30	1755-1	Spacer washer	1
31	1753	Retaining ring (5160-75)	1
32	10220-75	Carriage bolt, 5/16-18 x 3/4"	4
34	10235-SS	Setscrew, 3/8-16 x 1" cup pt, SS	1
35	6440-SS	Spacer washer	1
37	6441-1	Spacer washer	1
38	10925-5	Label	1

Model-specific parts (item number in parentheses). Less-hose models (LPL / MPL / HPL) use the same parts as the matching hose model minus items 7, 8 and 28. LP optional hoses: -OG uses 5121- / 5101- / 5131-, -RH uses 3870- / 5045- / 5066- (1/4" / 3/8" / 1/2") plus the length.

Model	Spring (1)	Frame	Swivel (6)	Hose (7)	Hose Guard (8)	Clamp (18)	Roller Bkt (27)	Ball Stop (28)	Elbow (36)
Low Pressure
P-LP-110	1959-1	S	1969	5150-10	237-1	2169	1728-2	131	-
P-LP-115	1959-2	S	1969	5150-15	237-1	2169	1728-2	131	-
P-LP-125	1959-3	S	1969	5150-25	237-1	2169	1728-2	131	-
P-LP-130	1959-4	S	1969	5150-30	237-1	2169	1728-2	131	-
P-LP-135	1959-5	S	1969	5150-35	237-1	2169	1728-2	131	-
P-LP-140	689-4	L	1969	5150-40	237-1	2169	1728-3	131	-
P-LP-150	689-5	L	1969	5150-50	237-1	2169	1728-3	131	-
P-LP-310	1959-1	S	1935	5153-10	237-1	381	1728-2	131-3	-
P-LP-315	1959-2	S	1935	5153-15	237-1	381	1728-2	131-3	-
P-LP-325	1958-7	S	1935	5153-25	237-1	381	1728-2	131-3	-
P-LP-330	689-3	L	1935	5153-30	237-1	381	1728-3	131-3	-
P-LP-335	689-3	L	1935	5153-35	237-1	381	1728-3	131-3	-
P-LP-340	689-4	L	1935	5153-40	237-1	381	1728-3	131-3	-
P-LP-350	1961-7	L	1935	5153-50	237-1	381	1728-3	131-3	-
P-LP-415	689-1	L	439	5154-15	398-1	383	1728-3	131-4	-
P-LP-425	689-2	L	439	5154-25	398-1	383	1728-3	131-4	-
P-LP-430	1961-5	L	439	5154-30	398-1	383	1728-3	131-4	-
P-LP-450	2037-6	L*	439	5154-50	398-1	383	1829-2	131-4	-
Medium Pressure
P-MP-320	2037-4	L	1935	5224-20	237-1	381	1728-3	131-3	500
P-MP-325	2037-3	L	1935	5224-25	237-1	381	1728-3	131-3	500
P-MP-330	2037-2	L	1935	5224-30	237-1	381	1728-3	131-3	500
P-MP-335	2037-1	L	1935	5224-35	237-1	381	1728-3	131-3	500
P-MP-420	2037-4	L	434	5256-20	398-1	383	1728-3	131-4	1671
P-MP-425	2037-3	L	434	5256-25	398-1	383	1728-3	131-4	1671
P-MP-430	2037-2	L	434	5256-30	398-1	383	1728-3	131-4	1671
High Pressure
P-HP-120	2037-4	L	499	5304-20	237-1	115	1728-3	131	616
P-HP-125	2037-3	L	499	5304-25	237-1	115	1728-3	131	616
P-HP-130	2037-2	L	499	5304-30	237-1	115	1728-3	131	616
P-HP-135	2037-1	L	499	5304-35	237-1	115	1728-3	131	616
P-HP-320	2037-4	L	521	5336-20	237-1	613	1728-3	131-3	617
P-HP-325	2037-3	L	521	5336-25	237-1	613	1728-3	131-3	617
P-HP-330	2037-2	L	521	5336-30	237-1	613	1728-3	131-3	617

Frame parts (S = small frame, L = large frame, L* = P-LP-450):

Frame	Drum (2)	Drum (3)	Base (4)	Arm (5)
S	139-1	140-1	1954	1732-1
L	1948	1947	1970	1732-2
L*	1948-1	1947	1970	1732-2

9

Where can I find product documents?

PDF

P Series Spec Sheet

Dimension drawing, model capacities, hose specifications, material options and the full part-number key.

PDF

Spring Rewind Reel Operating Manual (PM-001)

Installation, mounting, spring tension adjustment, safe operation and routine maintenance.

PDF

P Series Exploded Parts Drawing (EXP-10)

Printable parts breakdown with item callouts and the model-by-model parts list.

⚠ WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer, and Chromium, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

i

Standard reels ship from Coxreels. Optioned reels are built to order — request a quote for lead time.

How is this product sold?

Each. One reel per part number, as listed in the model table.

Shop Parts by